Motorola Mobility LLC T56KT1 User Manual
Chapter 4: Mechanical Specifications
December 15, 2009
G30 - Module Hardware Description
75
Mating Connector
The RF mating connector should be a standard U.FL plug connector or cable assembly, which
corresponds to the G30 U.FL connector specifications.
corresponds to the G30 U.FL connector specifications.
Only Hirose U.FL mating cable may be mated with G30. A family of Hirose mating cables are
available.
available.
Such a cable assembly example is the Hirose U.FL-LP-040 is U.FL-R-SMT, which is illustrated
in
in
.
Figure 4-7: U.FL Mating Connector
Rated voltage
60 VAC (rms) - standard receipt (Styles
A, B)
A, B)
Dielectric
Withstanding
Voltage
Withstanding
Voltage
200 VAC, 50 Hz for 1 min (at sea level)
Insulation
Resistance
Resistance
500 Megaohms min
Contact Resistance
(connectors only)
(connectors only)
20 milliohms max (Center)
10 milliohms max (Outer, Plug)
10 milliohms max (Outer, Receptacle)
10 milliohms max (Outer, Plug)
10 milliohms max (Outer, Receptacle)
Durability
30 cycles - standard receipt (Styles A,
B)
B)
Disengagement
Force
Force
2N min perpendicular
4N min orthogonal
4N min orthogonal
Center Contact
Retention force
Retention force
0.15N min
Tape/Reel
Packaging
(receptacle)
Packaging
(receptacle)
12mm carrier per EIA-481
Operating
Temperature
Temperature
40°C to + 90°C
Table 4-3: U.FL Connector Specifications (Cont.)
Parameter
Specifications