Nokia Solutions and Networks T6FE1 User Manual

FEB 2005

 G-1

This procedure is not part of a normal Optimization.

Perform this procedure only on an exception basis when no alternative
exists to load a BTS Device with the correct version of ROM Code.

One GLI must be INS_ACTIVE (bright green) before
ROM Code can be downloaded to non–GLI Devices.

The correct ROM and RAM Codes for the Software
Release used on the BSS must be loaded into BTS
Devices. To identify the correct device ROM and RAM
Code Loads for the Software Release being used on the
BSS, refer to the Version Matrix section of the SCt
CDMA Release Notes (supplied on the tapes or
CD–ROMs containing the BSS Software).

All devices in a BTS must be loaded with the ROM and
RAM Code specified for the Software Release used on the
BSS before any Optimization or Acceptance Test
Procedures can be performed.

If a replacement device is loaded with ROM Code that is
not compatible with the BSS Software Release being used,
the Device ROM Code can be changed using the LMF
before performing the BTS Optimization and ATPs. A
device loaded with later release ROM Code can not be
converted back to a previous release ROM Code in the
field without Motorola assistance.

If it is necessary to download ROM Code to a device from the LMF, the
procedure in Table G-1 includes steps for both ROM and RAM Code
download using the LMF.

Prior to performing this procedure, ensure the correct ROM and RAM
Code Files exist in the LMF Computer’s applicable <x>:\<lmf home
directory>\

a\loads\<codeload#>\code Folder for each of the

devices to be loaded.