Nokia Solutions and Networks T6FE1 User Manual

Downloading ROM Code  

– continued

 G-2

FEB 2005

The Release Level of the ROM Code to be downloaded
must be the one specified for the Software Release
installed in the BSS. The Release Level of the ROM Code
resident in the other devices in the BTS must also be
correct for the BSS Software Release being used.

ROM Code must not be downloaded to a frame loaded
with code for a BSS Software Release with which it is not
compatible.

This procedure should only be used to upgrade
replacement devices for a BTS. It should NOT be used to
upgrade all devices in a BTS.

If a BTS is to be upgraded from R15.x to R16.0, etc., the
upgrade should be done by the OMC–R using the
DownLoad Manager.

Table G-1: ROM and RAM Code Download to Devices Procedure

n Step

1

Click on the device to be loaded.

More than one device of the same type can be selected for download by either clicking on each
one to be downloaded or from the BTS Menu Bar Select Pull–down Menu, select the device item
that applies.

Where:  device  =  the type of device to be loaded (BBX, CSM, GLI, MCC)

2

From the BTS Menu Bar Device Pull–down Menu, select Status.

– A Status Report Window will appear.

3

Make a note of the number in the HW Bin Type column.

“HW Bin Type” is the Hardware Binary Type for the device. This code is used as the last four
digits in the filename of a device’s Binary ROM Code File.

– By using this part of the filename, the ROM Code File can be matched to the device in which

it is to be loaded.

4

Click OK to close the Status Window.

5

Click on the device to be loaded.

ROM Code is automatically selected for download from the <x>:\<lmf  Home
Directory>\version folder>\<Code Folder>

 specified by the NextLoad property

in the bts–#.CDF  File.

To check the value of the NextLoad Property, click on Util > Examine > Display NextLoad.

– A Pop–up Message will show the value of the NextLoad.

table continued on next page