Nokia Solutions and Networks T6FE1 User Manual
Downloading ROM Code
– continued
FEB 2005
1X SC 4812T Lite BTS Optimization/ATP
G-3
PRELIMINARY
Table G-1: ROM and RAM Code Download to Devices Procedure
n
Action
Step
6
From the BTS Menu Bar Device Pull–down Menus, select Download > ROM.
S
If the file matching the Hardware Binary Type of the device is found in the Code Folder, a
Status Report shows the result of the download.
Status Report shows the result of the download.
– Proceed to Step 11.
S
If a file selection Window appears, select the ROM Code File manually.
– Proceed to Step 7.
7
Double–click on the Version Folder with the desired Version Number for the ROM Code File (for
example: 2.16.0.x).
example: 2.16.0.x).
8
Double–click the Code Folder.
– A list of ROM and RAM Code Files will be displayed.
9
! CAUTION
A ROM Code File with the correct HW Bin Type must be chosen. Using a file with the wrong
HW Bin Type can result in unpredictable operation and damage to the device.
HW Bin Type can result in unpredictable operation and damage to the device.
Click on the ROM Code File with the filename that matches the device type and HW Bin Type
number noted in Step 3 (for example, file bbx_rom.bin.0604 is the ROM Code File for a BBX
with a HW Bin Type of 0604).
number noted in Step 3 (for example, file bbx_rom.bin.0604 is the ROM Code File for a BBX
with a HW Bin Type of 0604).
– The file should be highlighted.
10
Click on the Load Button.
– A Status Report Window is displayed showing the result of the download.
NOTE
If the ROM Load failed for some devices, load them individually by clicking on one device,
perform Steps 6 through 10 for it, and repeat the process for each remaining device.
perform Steps 6 through 10 for it, and repeat the process for each remaining device.
11
Click OK to close the Status Window.
12
From the LMF Window Menu Bar Too
ls
Pull–down Menus, select Update NextLoad > CDMA.
13
In the left–hand pane of the window that opens, click on the BTS Number for the frame being
loaded (for example, BTS–14).
loaded (for example, BTS–14).
14
On the list of versions displayed in the right–hand pane, click the Button next to the Version
Number of the folder that was used for the ROM Code download (for example, 2.16.0.x) and click
Save.
Number of the folder that was used for the ROM Code download (for example, 2.16.0.x) and click
Save.
– A Pop–up Message will appear showing the CDF has been updated.
15
Click on the OK Button to dismiss the Pop–up Message.
16
Click on the device that was loaded with ROM Code.
table continued on next page
G