Digital Security Controls Ltd. 06GS30551 User Manual

To view the Dialled, Received and Missed calls, click the Load  button. Depending on programming, some telephone
numbers may not have Caller ID.

If this Device is connected to a Control panel or another telephone device, this section will allow you to view the calls
received by this Device.

This section will allow you to view any unanswered incoming calls.

This section will allow you to view any calls dialled by this Device whether in Contact ID Communicator mode and/or GSM
Interface mode.

This page will allow you to monitor and control in real-time all the Device functions and, if not previously done, unblock the
SIM CARD PIN.

,

,

,

,

,

This section shows the GSM Module data. This virtual display shows the GSM Network Provider, the Device battery charge
(for the precise level, position the mouse arrow on the battery icon for a several seconds) and GSM signal reception
(indicated by 10 bars).
The virtual Comunication LED is usually GREEN. It will turn RED in the event of a breakdown in communication between
the software and this Device. If it turns AMBER, this Device is either reading the SIM CARD or receiving/making a telephone
call, under these circumstances the status update will be suspended temporarily.

This section shows the status of each of the 4 Inputs (GREEN LED = Input balanced; RED LED = Input Unbalanced) and any
Special functions associated with the Inputs.

This section shows the status of each of the 4 Outputs  (GREEN LED = Output in standby; RED LED = Output activated). If
any of the Outputs has been set up as “Reserved” (refer to “Outputs page”),  RED LED On, it will be possible to activate/
deactivate the Outputs in real-time by right-clicking the respective Polarity option and selecting the Activate/Deactivate sub-
option.

This section shows the events as they occur (RED LED On).

This section shows the Date and Time of the next periodic SMS text message (refer to the SMS dialler page).

This section shows the Date and Time of the next periodic Contact ID report  (refer to the Contact ID Communicator page).

This button will allow you to interrupt any ongoing calls and stop the outgoing call queue.

,

,

,

,

,