Digital Security Controls Ltd. 06GS30551 User Manual
8
GS3055-I
The SIM-CARD can be programmed via PC, using any GSM cellphone or in “C-24 Remote” mode, with pre-authorized service.
NOTE: The manufacturer shall not assume responsibility for damage arising from improper programming via
GSM Cellphone.
NOTE: The manufacturer shall not assume responsibility for damage arising from improper programming via
GSM Cellphone.
Fig. 3 - Null-Modem cable connection for programming via PC
PROGRAMMING THE SIM CARD VIA PC
This section contains the programming instructions using the GS3055 Software Application. This programming method
requires the connection of a Null-Modem cable (see Fig. 3) to the RS232 input [10] of this Device and the computer COM port.
Once the Null-Modem cable has been connected, set the computer COM port through the Settings->Serial Port option from
the Menu.
requires the connection of a Null-Modem cable (see Fig. 3) to the RS232 input [10] of this Device and the computer COM port.
Once the Null-Modem cable has been connected, set the computer COM port through the Settings->Serial Port option from
the Menu.
Viewing the Device Settings
To view the Device settings on the screen, use the Programming->Load option from the Menu.
Downloading the Device Settings
Once programming has been completed (or an uploaded file containing existing data has been modified), download the data
into this Device, using the Programming->Download option from the Menu.
into this Device, using the Programming->Download option from the Menu.
Preliminary operations
When the application starts, you will be presented with the Main window showing two sections on the left hand side.
z
z
Folders: This section will allow you to click on the various Programming and Control Pages.
z
Customers: This section will allow you to delete or retrieve configuration data, as follows:
1. Using the right button on the mouse, click on the Customer’s name.
2. Click Load to upload the respective data from the Hard-Disk, or Delete to delete the data configuration.
You can load the configuration data by double clicking the respective name field.
You can list Customers in alphabetical or code order by clicking the heading of the column concerned.
1. Using the right button on the mouse, click on the Customer’s name.
2. Click Load to upload the respective data from the Hard-Disk, or Delete to delete the data configuration.
You can load the configuration data by double clicking the respective name field.
You can list Customers in alphabetical or code order by clicking the heading of the column concerned.
,
,
,
,
,
To start the configuration of a new Customer, click on File->New Customer then select the device (GS3055-I) from the
product list in the successive window.
product list in the successive window.
The configuration data is presented on 4 pages, a further 2 pages (Calls and Status) are for “Supervisory and Control”
purposes. All the pages are described in detail in this section.
purposes. All the pages are described in detail in this section.
Telephone Page
The Telephone Page phonebook holds 95 telephone numbers.
,
,
,
,
,
The first eight numbers in the phonebook will also be used for the SMS functions.
Telephone Numbers
Description: enter an alphanumeric string of up to 20 characters.
Number: enter a telephone number of up to 20 digits (only digits and “+” signs are accepted).
Remote Control Numbers: select the telephone numbers which will be able to control Outputs 1, 2, 3 and 4 over the
phone. The telephone numbers cannot be selected in open order, therefore, if telephone numbers 1 and 6 are selected,
telephone numbers 2, 3, 4 and 5 will be selected automatically.
phone. The telephone numbers cannot be selected in open order, therefore, if telephone numbers 1 and 6 are selected,
telephone numbers 2, 3, 4 and 5 will be selected automatically.
5
5
4
4
9
9
8
8
7
7
6
6
3
3
2
2
1
1
DB9 female connector
7 wire shielded cable
DB9 female connector
to PC
to this Device