Digital Security Controls Ltd. 09GS260L User Manual
18
Option 382
Option 382, sub-option 5, ‘T-Link Interface Enabled’, must be set to On.
Option 382, sub-option 5, ‘T-Link Interface Enabled’, must be set to On.
Connecting the TL260GS/TL265GS/GS2060/GS2065 Communicator
• Power Terminal Blocks
• PC-Link Connection
• Ethernet Interface
• Hardware Default Jumper
• PC-Link Connection
• Ethernet Interface
• Hardware Default Jumper
STATUS LEDs
The module has four onboard surface mount LED indicators. These include a Trouble Status LED on page 18, a Network Con-
nection Status LED on page 20, and two Signal Strength LEDs on page 20.
nection Status LED on page 20, and two Signal Strength LEDs on page 20.
Trouble Status LED
This Yellow LED will flash to indicate a trouble on the unit. The number of flashes indicates the type of trouble. See the table
below for the types of conditions which will activate the Trouble Status LED.
below for the types of conditions which will activate the Trouble Status LED.
.
Panel Supervision Trouble
Table 3: Trouble Status LED
# of Flashes
Trouble
1
Reserved
2
3
Reserved
4
SIM Lock Trouble
Reserved
5
6
7
8
9
10
Connect24 Configuration SMS Failure
Reserved
11
12
Remote Firmware Update Pending