Digital Security Controls Ltd. 163G4005 User Manual
4005 Series
37
SIA
Date/Time on SIA packet: if is enabled, on the SIA package will also include the date and time.
Label: this column lists / describes the events for which to send a message.
Each input can be programmed with a specific Customer code (account).
Customer Code: enter the Customer Code (4 hexadecimal characters).
Contact ID Identifier: enter the Contact ID code that the communicator will sent when the event occurs.
Event SIA Identifier: enter the SIA code that the communicator will sent when the event occurs.
Restore SIA Identifier: enter the SIA code that the communicator will sent when the event ends (00 if disabled),
The communicator will send the code SIA event when the event ends, ONLY if the Restore option is enabled.
Channel type (Internal Event): select the channel Type: CID: over GSM or CID/SIA: over data network (see on page 16).
Event enabled: if disabled, the event does NOT send codes, when it ends. If enabled when the event ends, send the pro-
grammed codes (see Restore SIA Identifier). Other programming: Disabled, Send Activation, Send Restoral, Send Activation
and Restoral, Invalid Selection).
grammed codes (see Restore SIA Identifier). Other programming: Disabled, Send Activation, Send Restoral, Send Activation
and Restoral, Invalid Selection).
Telephone Numbers: click on [+] Telephone Numbers columns in accordance with the desired event. The tick indicates that a
particular telephone number will be called when an event occurs.
particular telephone number will be called when an event occurs.
CID/SIA to SMS/Voice
If device detects the Control panel connected on LI line is dialing a number present in phonebook and the option “CID/SIA conver-
sion” is enabled, the device decodes the CID or SIA event transmitted by Control panel then compare it respectively with all the
patterns columns; if the decode event matches with a pattern then related voice messages or SMS are sent, see following table.
sion” is enabled, the device decodes the CID or SIA event transmitted by Control panel then compare it respectively with all the
patterns columns; if the decode event matches with a pattern then related voice messages or SMS are sent, see following table.
LI / LE
switch
Protocol
Selection
IP Receiver
CID/SIA Event
conversion
Virtual
Receiver
Effects
LE
CID / SIA Not Interested Disabled
Not Interested Voice Call on LE (only if PTM is enabled)
LE
CID / SIA Not Interested Enabled
Not Interested Voice Call on LE (only if PTM is enabled)
CID/SIA conversion events (voice call/SMS) are
triggered
triggered
Simulated
PSTN
PSTN
CID / SIA Disabled
Disabled
Disabled
Voice call on GSM
Simulated
PSTN
PSTN
CID / SIA Disabled
Enabled
Disabled
Voice call on GSM
CID conversion events (voice call/SMS) are trig-
gered
CID conversion events (voice call/SMS) are trig-
gered
Simulated
PSTN
PSTN
CID / SIA Disabled
Enabled
Enabled
CID/SIA conversion events (voice call/SMS) are
triggered
The Communicator generates Handshake on LI
The Communicator generates Kissoff on LI
triggered
The Communicator generates Handshake on LI
The Communicator generates Kissoff on LI
Simulated
PSTN
PSTN
CID / SIA Enabled
Disabled
Disabled
CID/SIA Events transmission to IP receiver
The Communicator generates Handshake on LI
The Communicator generates Kissoff on LI when
receives Ack from IP receiver
The Communicator generates Handshake on LI
The Communicator generates Kissoff on LI when
receives Ack from IP receiver
Simulated
PSTN
PSTN
CID / SIA Enabled
Enabled
Disabled
CID/SIA conversion events (voice call/SMS) are
triggered
CID/SIA Events transmission to IP receiver
The Communicator generates Handshake on LI
The Communicator generates Kissoff on LI when
receives Ack from IP receiver
triggered
CID/SIA Events transmission to IP receiver
The Communicator generates Handshake on LI
The Communicator generates Kissoff on LI when
receives Ack from IP receiver