Digital Security Controls Ltd. 163G4005 User Manual
4005 Series
5
INTRODUCTION
Devices in the 4005 Series are GSM communicators which, in the absence of a PSTN line, transmits vocal and digital alarms to
System III or System II receivers, via GPRS GPRS Quad-Band (HSPA Dual-Band). The following models are available.
System III or System II receivers, via GPRS GPRS Quad-Band (HSPA Dual-Band). The following models are available.
GS4005: communicator with 2G module in the plastic cabinet.
3G4005/AM: communicator with 850/1900 MHz 3G module, in the plastic cabinet.
3G4005/EU: communicator with 900/1800 MHz 3G module, in the plastic cabinet.
GS4005-K: kit including communicator with 2G module, antenna with 2 m cable, adapter and metal bracket.
3G4005-K/AM: kit including communicator with 850/1900 MHz 3G module, antenna with 2m cable, adapter and metal
bracket.
bracket.
3G4005-K/EU: kit including communicator with 900/1800 MHz 3G module, antenna with 2m cable, adapter and metal
bracket.
bracket.
All information relating to a specific model shall be attested to by reference to the corresponding code. The word “Communicator” is
being used to describe functions which are common to the various models. This manual provides programming and operation of the
Communicator. If there are any special installation requirements a remote outside antenna (ANT5-15) with 15 m cable is available.
being used to describe functions which are common to the various models. This manual provides programming and operation of the
Communicator. If there are any special installation requirements a remote outside antenna (ANT5-15) with 15 m cable is available.
This Communicator is fixed and shall be installed by Service Persons only (service person is defined as a person having the
appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in
performing a task and of measures to minimize the risks to that person or other persons). It shall be installed and used within
an environment that provides the pollution degree max 2, over voltages category II, in non-hazardous, indoor locations only.
This manual shall be used with the Installation Manual of the alarm control panel.
appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in
performing a task and of measures to minimize the risks to that person or other persons). It shall be installed and used within
an environment that provides the pollution degree max 2, over voltages category II, in non-hazardous, indoor locations only.
This manual shall be used with the Installation Manual of the alarm control panel.
General Features
Simulates land line
Switches automatically to GSM Network in the event of
land line trouble (line down)
land line trouble (line down)
Manages and signals Incoming/Outgoing call
GSM signal indicator
6 programmable terminals as Open Collector Outputs or
Input Lines
Input Lines
Land line overvoltage protection
GSM Quad-Band
(HSPA dual-band) o 3G Cellular Com-
municator
Integrated Antenna on Board or external Antenna with
magnetic base: kit including communicator with 850/1900
MHz 3G module, antenna with 2m cable, adapter and
metal bracket.
magnetic base: kit including communicator with 850/1900
MHz 3G module, antenna with 2m cable, adapter and
metal bracket.
SMS Dialer
Voice Dialer
Supports Contact ID communication format from a con-
nected control panel for communication over the GPRS
network
nected control panel for communication over the GPRS
network
GPRS/Internet communication with receivers Sur-Gard
System III / II
System III / II
PC-programmable options
32 SMS messages, each with a maximum length of 100
characters (2 for each Input Line plus 6 for Status Indica-
tions and 1 Periodic)
characters (2 for each Input Line plus 6 for Status Indica-
tions and 1 Periodic)
8 telephone numbers (max. 16 digits) programmable for
the SMS dialer
the SMS dialer
8 phone numbers programmable for Contact ID Dialer on
GPRS
GPRS
Up to 32 telephone numbers (max.16 digits) programma-
ble for the remote activation of the OC output
ble for the remote activation of the OC output
Remote activation of the outputs through caller identifica-
tion and/or SMS transmission
tion and/or SMS transmission
Credit balance check for pre-paid SIM Cards
Panel Transmission Monitoring (PTM)
Integrated tamper switches
PC-LINK connector
USB type A connector (Host and Device)
Programming through USB memory stick
Advanced Diagnostic and LOG recording
Local and remote programming and FW upgrade
Alarm event transmission over GSM/GPRS/HSPA
Programmable priority between PSTN/Cellular
Two way voice communication on the cellular
Optional backup battery
Anti-jamming