Digital Security Controls Ltd. 18PG9303 User Manual
D-307447 PGx303
Installation Instructions
©2018 Tyco Security Products
www.dsc.com
Tech. Support: 1-800-387-3630
After installation verify the product functionality in
conjunction with the compatible receiver used.
conjunction with the compatible receiver used.
Europe: CE/EN (EN 300220, EN 301489,
EN 50130-4, EN 50130- 5, EN 61000- 6-3, EN 62368-
1, EN50131-2-6 GRADE 2, CLASS II, EN50131-6
Type C) listed PG8303: 868 MHz PG4303: 433 MHz.
According to EN 50131- 1, this equipment can be
applied in installed systems up to and including Secur-
ity Grade 2, Environmental Class II.
UK: The PG8303 is suitable for use in systems
installed to conform to PD6662 at Grade 2 and envir-
onmental class II BS8243. The Power G peripheral
devices have two-way communication functionality,
providing additional benefits as described in the tech-
nical brochure. This functionality has not been tested
to comply with the respective technical requirements
and should therefore be considered outside the scope
of the product’s certification.
Simplified EU declaration of conformity
Hereby, Tyco Safety Products Canada Ltd. declares
that the radio equipment type is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
PG4303: http://dsc.com/pdf/1809003
PG8303: http://dsc.com/pdf/1809004
Frequency band Maximum power
1, EN50131-2-6 GRADE 2, CLASS II, EN50131-6
Type C) listed PG8303: 868 MHz PG4303: 433 MHz.
According to EN 50131- 1, this equipment can be
applied in installed systems up to and including Secur-
ity Grade 2, Environmental Class II.
UK: The PG8303 is suitable for use in systems
installed to conform to PD6662 at Grade 2 and envir-
onmental class II BS8243. The Power G peripheral
devices have two-way communication functionality,
providing additional benefits as described in the tech-
nical brochure. This functionality has not been tested
to comply with the respective technical requirements
and should therefore be considered outside the scope
of the product’s certification.
Simplified EU declaration of conformity
Hereby, Tyco Safety Products Canada Ltd. declares
that the radio equipment type is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
PG4303: http://dsc.com/pdf/1809003
PG8303: http://dsc.com/pdf/1809004
Frequency band Maximum power
Frequency
Max power
868.0 MHz - 868.6 MHz
+14 dBm
868.7 MHz - 869.2 MHz
+14 dBm
433.04 MHz - 434.79
MHz
+10 dBm
European single point of contact: Tyco Safety
Products,
Voltaweg 20, 6101
XK Echt, Netherlands.
Products,
Voltaweg 20, 6101
XK Echt, Netherlands.
FCC COM PLIANCE STATEM ENT
WARNING! Changes or modifications to this unit not
expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the
equipment. This device has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in residential installations. This
equipment generates uses and can radiate radio fre-
quency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful
interference to radio and television reception.
However, there is no guarantee that interference will
not occur in a particular installation. If this device
does cause such interference, which can be verified
by turning the device off and on, the user is encour-
aged to eliminate the interference by one or more of
the following measures:
– Re-orient or re-locate the receiving antenna.
– Increase the distance between the device and the
receiver.
– Connect the device to an outlet on a circuit different
from the one that supplies power to the receiver.
– Consult the dealer or an experienced radio/TV tech-
nician.
FCC ID: F5318PG9303
WARNING! Changes or modifications to this unit not
expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the
equipment. This device has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in residential installations. This
equipment generates uses and can radiate radio fre-
quency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful
interference to radio and television reception.
However, there is no guarantee that interference will
not occur in a particular installation. If this device
does cause such interference, which can be verified
by turning the device off and on, the user is encour-
aged to eliminate the interference by one or more of
the following measures:
– Re-orient or re-locate the receiving antenna.
– Increase the distance between the device and the
receiver.
– Connect the device to an outlet on a circuit different
from the one that supplies power to the receiver.
– Consult the dealer or an experienced radio/TV tech-
nician.
FCC ID: F5318PG9303
Indust ry Canada St at ement
This equipment complies with FCC and ISED Canada
RF radiation exposure limits set forth for an uncon-
trolled environment. This device complies with FCC
Rules Part 15 and with ISED Canada licence exempt
RSS standard(s). Operation is subject to the following
two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any inter-
ference that may be received or that may cause
undesired operation.
Le present appareil est conforme aux CNR d'ISED
Canada applicables aux appareils radio exempts de
This equipment complies with FCC and ISED Canada
RF radiation exposure limits set forth for an uncon-
trolled environment. This device complies with FCC
Rules Part 15 and with ISED Canada licence exempt
RSS standard(s). Operation is subject to the following
two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any inter-
ference that may be received or that may cause
undesired operation.
Le present appareil est conforme aux CNR d'ISED
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisee aux deux con-
ditions suivantes :(1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioelectrique subi, meme si
le brouillage est susceptible d'en compromettre le fonc-
tionnement.
To comply with FCC Section 1.1310 for human expos-
ure to radio frequency electromagnetic fields and IC
requirements, implement the following instruction: A
distance of at least 20cm between the equipment and
all persons should be maintained during the operation
of the equipment. Le dispositif doit être placé à une
distance d'au moins 20 cm à partir de toutes les per-
sonnes au cours de son fonctionnement normal. Les
antennes utilisées pour ce produit ne doivent pas être
situés ou exploités conjointement avec une autre
antenne ou transmetteur.
IC: 160A-PG9303
The term IC before the radio certification number sig-
nifies that the Industry Canada technical spe-
cifications were met. This Class B digital apparatus
complies with Canadian ICES-003. This device com-
plies with RSS-247 of Industry Canada. Operation is
subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must
accept any interference, including interference that
may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme à
la norme NMB- 003 du Canada. Ce dispositif satisfait
aux exigences d’Industrie Canada, prescrites dans le
document CNR- 247. son utilisation est autorisée seule-
ment aux conditions suivantes: (1) il ne doit pas
produire de brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage radi-
oélectrique reçu, même si ce brouillage est sus-
ceptible de compromettre le fonctionnement du
dispositif.
ditions suivantes :(1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioelectrique subi, meme si
le brouillage est susceptible d'en compromettre le fonc-
tionnement.
To comply with FCC Section 1.1310 for human expos-
ure to radio frequency electromagnetic fields and IC
requirements, implement the following instruction: A
distance of at least 20cm between the equipment and
all persons should be maintained during the operation
of the equipment. Le dispositif doit être placé à une
distance d'au moins 20 cm à partir de toutes les per-
sonnes au cours de son fonctionnement normal. Les
antennes utilisées pour ce produit ne doivent pas être
situés ou exploités conjointement avec une autre
antenne ou transmetteur.
IC: 160A-PG9303
The term IC before the radio certification number sig-
nifies that the Industry Canada technical spe-
cifications were met. This Class B digital apparatus
complies with Canadian ICES-003. This device com-
plies with RSS-247 of Industry Canada. Operation is
subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must
accept any interference, including interference that
may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme à
la norme NMB- 003 du Canada. Ce dispositif satisfait
aux exigences d’Industrie Canada, prescrites dans le
document CNR- 247. son utilisation est autorisée seule-
ment aux conditions suivantes: (1) il ne doit pas
produire de brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage radi-
oélectrique reçu, même si ce brouillage est sus-
ceptible de compromettre le fonctionnement du
dispositif.
Limit ed W arrant y
Digital Security Controls (DSC) warrants that for a
period of 12 months from the date of purchase, the
product shall be free of defects in materials and work-
manship under normal use and that in fulfilment of any
breach of such warranty, DSC shall, at its option,
repair or replace the defective equipment upon return
of the equipment to its repair depot. This warranty
applies only to defects in parts and workmanship and
not to damage incurred in shipping or handling, or
damage due to causes beyond the control of DSC such
as lightning, excessive voltage, mechanical shock,
water damage, or damage arising out of abuse, alter-
ation or improper application of the equipment. The
foregoing warranty shall apply only to the original
buyer, and is and shall be in lieu of any and all other
warranties, whether expressed or implied and of all
other obligations or liabilities on the part of DSC.
Digital Security Controls neither assumes respons-
ibility for, nor authorizes any other person purporting
to act on its behalf to modify or to change this war-
ranty, nor to assume for it any other warranty or liab-
ility concerning this product. In no event shall DSC be
liable for any direct, indirect or consequential dam-
ages, loss of anticipated profits, loss of time or any
other losses incurred by the buyer in connection with
the purchase, installation or operation or failure of this
product. WARNING: DSC recommends that the entire
system be completely tested on a regular basis.
However, despite frequent testing, and due to, but not
limited to, criminal tampering or electrical disruption,
it is possible for this product to fail to perform as
expected. Important Information: Changes/-
modifications not expressly approved by DSC could
void the user’s authority to operate this equipment.
IMPORTANT READ CAREFULLY: DSC Software
purchased with or without Products and Components is
copyrighted and is purchased under the following
license terms:
This End User License Agreement ("EULA") is a
legal agreement between You (the company,
Digital Security Controls (DSC) warrants that for a
period of 12 months from the date of purchase, the
product shall be free of defects in materials and work-
manship under normal use and that in fulfilment of any
breach of such warranty, DSC shall, at its option,
repair or replace the defective equipment upon return
of the equipment to its repair depot. This warranty
applies only to defects in parts and workmanship and
not to damage incurred in shipping or handling, or
damage due to causes beyond the control of DSC such
as lightning, excessive voltage, mechanical shock,
water damage, or damage arising out of abuse, alter-
ation or improper application of the equipment. The
foregoing warranty shall apply only to the original
buyer, and is and shall be in lieu of any and all other
warranties, whether expressed or implied and of all
other obligations or liabilities on the part of DSC.
Digital Security Controls neither assumes respons-
ibility for, nor authorizes any other person purporting
to act on its behalf to modify or to change this war-
ranty, nor to assume for it any other warranty or liab-
ility concerning this product. In no event shall DSC be
liable for any direct, indirect or consequential dam-
ages, loss of anticipated profits, loss of time or any
other losses incurred by the buyer in connection with
the purchase, installation or operation or failure of this
product. WARNING: DSC recommends that the entire
system be completely tested on a regular basis.
However, despite frequent testing, and due to, but not
limited to, criminal tampering or electrical disruption,
it is possible for this product to fail to perform as
expected. Important Information: Changes/-
modifications not expressly approved by DSC could
void the user’s authority to operate this equipment.
IMPORTANT READ CAREFULLY: DSC Software
purchased with or without Products and Components is
copyrighted and is purchased under the following
license terms:
This End User License Agreement ("EULA") is a
legal agreement between You (the company,
individual or entity who acquired the Software and
any related Hardware) and Digital Security Controls,
a division of Tyco Safety Products Canada Ltd.
("DSC"), the manufacturer of the integrated security
systems and the developer of the software and any
related products or components ("HARDWARE")
which You acquired.
If the DSC software product ("SOFTWARE
PRODUCT" or "SOFTWARE") is intended to be
accompanied by HARDWARE, and is NOT accom-
panied by new HARDWARE, You may not use, copy
or install the SOFTWARE PRODUCT. The
SOFTWARE PRODUCT includes computer software,
and may include associated media, printed materials,
and "online" or electronic documentation.
Any software provided along with the SOFTWARE
PRODUCT that is associated with a separate end user
license agreement is licensed to You under the terms
of that license agreement.
By installing, copying, downloading, storing, accessing
or otherwise using the SOFTWARE PRODUCT, You
agree unconditionally to be bound by the terms of this
EULA, even if this EULA is deemed to be a modi-
fication of any previous arrangement or contract. If
You do not agree to the terms of this EULA, DSC is
unwilling to license the SOFTWARE PRODUCT to
You, and You have no right to use it.
SOFTWARE PRODUCT LICENSE
The SOFTWARE PRODUCT is protected by copy-
right laws and international copyright treaties, as well
as other intellectual property laws and treaties. The
SOFTWARE PRODUCT is licensed, not sold.
1. GRANT OF LICENSE. This EULA grants You the
following rights:
(a) Software Installation and Use - For each license
You acquire, You may have only one copy of the
SOFTWARE PRODUCT installed.
(b) Storage/Network Use - The SOFTWARE
PRODUCT may not be installed, accessed, displayed,
run, shared or used concurrently on or from different
computers, including a workstation, terminal or other
digital electronic device ("Device"). In other words, if
You have several workstations, You will have to
acquire a license for each workstation where the
SOFTWARE will be used.
(c) Backup Copy - You may make back up copies of
the SOFTWARE PRODUCT, but You may only have
one copy per license installed at any given time. You
may use the back up copy solely for archival pur-
poses. Except as expressly provided in this EULA,
You may not otherwise make copies of the
SOFTWARE PRODUCT, including the printed mater-
ials accompanying the SOFTWARE.
2. DESCRIPTION OF OTHER RIGHTS AND
LIMITATIONS
(a) Limitations on Reverse Engineering, Decom-
pilation and Disassembly - You may not reverse engin-
eer, decompile, or disassemble the SOFTWARE
PRODUCT, except and only to the extent that such
activity is expressly permitted by applicable law not-
withstanding this limitation. You may not make any
changes or modifications to the Software, without the
written permission of an officer of DSC. You may not
remove any proprietary notices, marks or labels from
the Software Product. You shall institute reasonable
measures to ensure compliance with the terms and
conditions of this EULA.
(b) Separation of Components - The SOFTWARE
PRODUCT is licensed as a single product. Its com-
ponent parts may not be separated for use on more
than one HARDWARE unit.
(c) Single INTEGRATED PRODUCT - If You
acquired this SOFTWARE with HARDWARE, then
the SOFTWARE PRODUCT is licensed with the
HARDWARE as a single integrated product. In this
case, the SOFTWARE PRODUCT may only be used
with the HARDWARE as set forth in this EULA.
any related Hardware) and Digital Security Controls,
a division of Tyco Safety Products Canada Ltd.
("DSC"), the manufacturer of the integrated security
systems and the developer of the software and any
related products or components ("HARDWARE")
which You acquired.
If the DSC software product ("SOFTWARE
PRODUCT" or "SOFTWARE") is intended to be
accompanied by HARDWARE, and is NOT accom-
panied by new HARDWARE, You may not use, copy
or install the SOFTWARE PRODUCT. The
SOFTWARE PRODUCT includes computer software,
and may include associated media, printed materials,
and "online" or electronic documentation.
Any software provided along with the SOFTWARE
PRODUCT that is associated with a separate end user
license agreement is licensed to You under the terms
of that license agreement.
By installing, copying, downloading, storing, accessing
or otherwise using the SOFTWARE PRODUCT, You
agree unconditionally to be bound by the terms of this
EULA, even if this EULA is deemed to be a modi-
fication of any previous arrangement or contract. If
You do not agree to the terms of this EULA, DSC is
unwilling to license the SOFTWARE PRODUCT to
You, and You have no right to use it.
SOFTWARE PRODUCT LICENSE
The SOFTWARE PRODUCT is protected by copy-
right laws and international copyright treaties, as well
as other intellectual property laws and treaties. The
SOFTWARE PRODUCT is licensed, not sold.
1. GRANT OF LICENSE. This EULA grants You the
following rights:
(a) Software Installation and Use - For each license
You acquire, You may have only one copy of the
SOFTWARE PRODUCT installed.
(b) Storage/Network Use - The SOFTWARE
PRODUCT may not be installed, accessed, displayed,
run, shared or used concurrently on or from different
computers, including a workstation, terminal or other
digital electronic device ("Device"). In other words, if
You have several workstations, You will have to
acquire a license for each workstation where the
SOFTWARE will be used.
(c) Backup Copy - You may make back up copies of
the SOFTWARE PRODUCT, but You may only have
one copy per license installed at any given time. You
may use the back up copy solely for archival pur-
poses. Except as expressly provided in this EULA,
You may not otherwise make copies of the
SOFTWARE PRODUCT, including the printed mater-
ials accompanying the SOFTWARE.
2. DESCRIPTION OF OTHER RIGHTS AND
LIMITATIONS
(a) Limitations on Reverse Engineering, Decom-
pilation and Disassembly - You may not reverse engin-
eer, decompile, or disassemble the SOFTWARE
PRODUCT, except and only to the extent that such
activity is expressly permitted by applicable law not-
withstanding this limitation. You may not make any
changes or modifications to the Software, without the
written permission of an officer of DSC. You may not
remove any proprietary notices, marks or labels from
the Software Product. You shall institute reasonable
measures to ensure compliance with the terms and
conditions of this EULA.
(b) Separation of Components - The SOFTWARE
PRODUCT is licensed as a single product. Its com-
ponent parts may not be separated for use on more
than one HARDWARE unit.
(c) Single INTEGRATED PRODUCT - If You
acquired this SOFTWARE with HARDWARE, then
the SOFTWARE PRODUCT is licensed with the
HARDWARE as a single integrated product. In this
case, the SOFTWARE PRODUCT may only be used
with the HARDWARE as set forth in this EULA.
(d) Rental - You may not rent, lease or lend the
SOFTWARE PRODUCT. You may not make it avail-
able to others or post it on a server or web site.
(e) Software Product Transfer - You may transfer all
of Your rights under this EULA only as part of a per-
manent sale or transfer of the HARDWARE, provided
You retain no copies, You transfer all of the
SOFTWARE PRODUCT (including all component
parts, the media and printed materials, any upgrades
and this EULA), and provided the recipient agrees to
the terms of this EULA. If the SOFTWARE
PRODUCT is an upgrade, any transfer must also
include all prior versions of the SOFTWARE
PRODUCT.
(f) Termination - Without prejudice to any other
rights, DSC may terminate this EULA if You fail to
comply with the terms and conditions of this EULA. In
such event, You must destroy all copies of the
SOFTWARE PRODUCT and all of its component
parts.
(g) Trademarks - This EULA does not grant You any
rights in connection with any trademarks or service
marks of DSC or its suppliers.
3. COPYRIGHT
All title and intellectual property rights in and to the
SOFTWARE PRODUCT (including but not limited to
any images, photographs, and text incorporated into
the SOFTWARE PRODUCT), the accompanying prin-
ted materials, and any copies of the SOFTWARE
PRODUCT, are owned by DSC or its suppliers. You
may not copy the printed materials accompanying the
SOFTWARE PRODUCT. All title and intellectual prop-
erty rights in and to the content which may be
accessed through use of the SOFTWARE PRODUCT
are the property of the respective content owner and
may be protected by applicable copyright or other
intellectual property laws and treaties. This EULA
grants You no rights to use such content. All rights not
expressly granted under this EULA are reserved by
DSC and its suppliers.
4. EXPORT RESTRICTIONS
You agree that You will not export or re export the
SOFTWARE PRODUCT to any country, person, or
entity subject to Canadian export restrictions.
5. CHOICE OF LAW: This Software License Agree-
ment is governed by the laws of the Province of
Ontario, Canada.
6. ARBITRATION
All disputes arising in connection with this Agreement
shall be determined by final and binding arbitration in
accordance with the Arbitration Act, and the parties
agree to be bound by the arbitrator's decision. The
place of arbitration shall be Toronto, Canada, and the
language of the arbitration shall be English.
7. LIMITED WARRANTY
(a) NO WARRANTY
DSC PROVIDES THE SOFTWARE "AS IS"
WITHOUT WARRANTY. DSC DOES NOT
WARRANT THAT THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT OPERATION
OF THE SOFTWARE WILL BE UNINTERRUPTED
OR ERROR-FREE.
(b) CHANGES IN OPERATING ENVIRONMENT
DSC shall not be responsible for problems caused by
changes in the operating characteristics of the
HARDWARE, or for problems in the interaction of
the SOFTWARE PRODUCT with non- DSC-
SOFTWARE or HARDWARE PRODUCTS.
(c) LIMITATION OF LIABILITY; WARRANTY
REFLECTS ALLOCATION OF RISK
IN ANY EVENT, IF ANY STATUTE IMPLIES
WARRANTIES OR CONDITIONS NOT STATED
IN THIS LICENSE AGREEMENT, DSC'S ENTIRE
LIABILITY UNDER ANY PROVISION OF THIS
LICENSE AGREEMENT SHALL BE LIMITED TO
THE GREATER OF THE AMOUNT ACTUALLY
PAID BY YOU TO LICENSE THE SOFTWARE
PRODUCT AND FIVE CANADIAN DOLLARS
(CAD$5.00). BECAUSE SOME JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION
SOFTWARE PRODUCT. You may not make it avail-
able to others or post it on a server or web site.
(e) Software Product Transfer - You may transfer all
of Your rights under this EULA only as part of a per-
manent sale or transfer of the HARDWARE, provided
You retain no copies, You transfer all of the
SOFTWARE PRODUCT (including all component
parts, the media and printed materials, any upgrades
and this EULA), and provided the recipient agrees to
the terms of this EULA. If the SOFTWARE
PRODUCT is an upgrade, any transfer must also
include all prior versions of the SOFTWARE
PRODUCT.
(f) Termination - Without prejudice to any other
rights, DSC may terminate this EULA if You fail to
comply with the terms and conditions of this EULA. In
such event, You must destroy all copies of the
SOFTWARE PRODUCT and all of its component
parts.
(g) Trademarks - This EULA does not grant You any
rights in connection with any trademarks or service
marks of DSC or its suppliers.
3. COPYRIGHT
All title and intellectual property rights in and to the
SOFTWARE PRODUCT (including but not limited to
any images, photographs, and text incorporated into
the SOFTWARE PRODUCT), the accompanying prin-
ted materials, and any copies of the SOFTWARE
PRODUCT, are owned by DSC or its suppliers. You
may not copy the printed materials accompanying the
SOFTWARE PRODUCT. All title and intellectual prop-
erty rights in and to the content which may be
accessed through use of the SOFTWARE PRODUCT
are the property of the respective content owner and
may be protected by applicable copyright or other
intellectual property laws and treaties. This EULA
grants You no rights to use such content. All rights not
expressly granted under this EULA are reserved by
DSC and its suppliers.
4. EXPORT RESTRICTIONS
You agree that You will not export or re export the
SOFTWARE PRODUCT to any country, person, or
entity subject to Canadian export restrictions.
5. CHOICE OF LAW: This Software License Agree-
ment is governed by the laws of the Province of
Ontario, Canada.
6. ARBITRATION
All disputes arising in connection with this Agreement
shall be determined by final and binding arbitration in
accordance with the Arbitration Act, and the parties
agree to be bound by the arbitrator's decision. The
place of arbitration shall be Toronto, Canada, and the
language of the arbitration shall be English.
7. LIMITED WARRANTY
(a) NO WARRANTY
DSC PROVIDES THE SOFTWARE "AS IS"
WITHOUT WARRANTY. DSC DOES NOT
WARRANT THAT THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT OPERATION
OF THE SOFTWARE WILL BE UNINTERRUPTED
OR ERROR-FREE.
(b) CHANGES IN OPERATING ENVIRONMENT
DSC shall not be responsible for problems caused by
changes in the operating characteristics of the
HARDWARE, or for problems in the interaction of
the SOFTWARE PRODUCT with non- DSC-
SOFTWARE or HARDWARE PRODUCTS.
(c) LIMITATION OF LIABILITY; WARRANTY
REFLECTS ALLOCATION OF RISK
IN ANY EVENT, IF ANY STATUTE IMPLIES
WARRANTIES OR CONDITIONS NOT STATED
IN THIS LICENSE AGREEMENT, DSC'S ENTIRE
LIABILITY UNDER ANY PROVISION OF THIS
LICENSE AGREEMENT SHALL BE LIMITED TO
THE GREATER OF THE AMOUNT ACTUALLY
PAID BY YOU TO LICENSE THE SOFTWARE
PRODUCT AND FIVE CANADIAN DOLLARS
(CAD$5.00). BECAUSE SOME JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION
OF LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
(d) DISCLAIMER OF WARRANTIES
THIS WARRANTY CONTAINS THE ENTIRE
WARRANTY AND SHALL BE IN LIEU OF ANY
AND ALL OTHER WARRANTIES, WHETHER
EXPRESSED OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE) AND
OF ALL OTHER OBLIGATIONS OR LIABILITIES
ON THE PART OF DSC. DSC MAKES NO OTHER
WARRANTIES. DSC NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON
PURPORTING TO ACT ON ITS BEHALF TO
MODIFY OR TO CHANGE THIS WARRANTY,
NOR TO ASSUME FOR IT ANY OTHER
WARRANTY OR LIABILITY CONCERNING THIS
SOFTWARE PRODUCT.
(e) EXCLUSIVE REMEDY AND LIMITATION OF
WARRANTY
UNDER NO CIRCUMSTANCES SHALL DSC BE
LIABLE FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES
BASED UPON BREACH OF WARRANTY,
BREACH OF CONTRACT, NEGLIGENCE, STRICT
LIABILITY, OR ANY OTHER LEGAL THEORY.
SUCH DAMAGES INCLUDE, BUT ARE NOT
LIMITED TO, LOSS OF PROFITS, LOSS OF THE
SOFTWARE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, COST OF CAPITAL, COST OF
SUBSTITUTE OR REPLACEMENT EQUIPMENT,
FACILITIES OR SERVICES, DOWN TIME,
PURCHASERS TIME, THE CLAIMS OaF THIRD
PARTIES, INCLUDING CUSTOMERS, AND
INJURY TO PROPERTY.
WARNING: DSC recommends that the entire system
be completely tested on a regular basis. However, des-
pite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is pos-
sible for this SOFTWARE PRODUCT to fail to per-
form as expected.
INCIDENTAL DAMAGES, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
(d) DISCLAIMER OF WARRANTIES
THIS WARRANTY CONTAINS THE ENTIRE
WARRANTY AND SHALL BE IN LIEU OF ANY
AND ALL OTHER WARRANTIES, WHETHER
EXPRESSED OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE) AND
OF ALL OTHER OBLIGATIONS OR LIABILITIES
ON THE PART OF DSC. DSC MAKES NO OTHER
WARRANTIES. DSC NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON
PURPORTING TO ACT ON ITS BEHALF TO
MODIFY OR TO CHANGE THIS WARRANTY,
NOR TO ASSUME FOR IT ANY OTHER
WARRANTY OR LIABILITY CONCERNING THIS
SOFTWARE PRODUCT.
(e) EXCLUSIVE REMEDY AND LIMITATION OF
WARRANTY
UNDER NO CIRCUMSTANCES SHALL DSC BE
LIABLE FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES
BASED UPON BREACH OF WARRANTY,
BREACH OF CONTRACT, NEGLIGENCE, STRICT
LIABILITY, OR ANY OTHER LEGAL THEORY.
SUCH DAMAGES INCLUDE, BUT ARE NOT
LIMITED TO, LOSS OF PROFITS, LOSS OF THE
SOFTWARE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, COST OF CAPITAL, COST OF
SUBSTITUTE OR REPLACEMENT EQUIPMENT,
FACILITIES OR SERVICES, DOWN TIME,
PURCHASERS TIME, THE CLAIMS OaF THIRD
PARTIES, INCLUDING CUSTOMERS, AND
INJURY TO PROPERTY.
WARNING: DSC recommends that the entire system
be completely tested on a regular basis. However, des-
pite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is pos-
sible for this SOFTWARE PRODUCT to fail to per-
form as expected.