TransCore 05531 User Manual

Command #533 displays the Wiegand retransmit interval. This interval specifies the 
delay in seconds before the reader retransmits Wiegand data for a tag still in the read 
zone. The factory default is 1 second.

Reader response:

WTI <01 to FF>

where 01 to FF = seconds (1–255) in hexadecimal.

For example, 10 = 16 seconds and FF = 255 seconds. The retransmit interval in ATA 
tag read mode is about twice these values.

Command 534 displays tag translation mode status, enabled or disabled. If tag 
translation mode is enabled, incoming full-frame tags in AAR or ATA format are 
translated according to ISO standards. Refer to 

 for more information.

Reader message:

where:

tag translation mode disabled

tag translation mode enabled

Command 535 displays buffer control mode status, enabled or disabled. Refer to 

 and 

 for more information.

Reader message:

where:

buffer control mode disabled

buffer control mode enabled

Command #537 displays echo mode status. In basic protocol (#610 Select Basic 
Protocol), the reader may be configured to enable (#6171 Enable Echo Mode) or dis-
able (#6170 Disable Echo Mode) the echo of received commands. Refer to sections 

 for more information.