TransCore 05531 User Manual
Commands
7-27
Reader response:
ECHO <0 to 1>
where
0
Echo status disabled (factory default)
1
Echo status enabled
540 Display Flash Checksum
Command #540 displays the flash memory checksum.
Reader response:
PCKS I0000 Exxxx
where
0000
Not applicable to the Encompass 4/4800 Multiprotocol Reader
xxxx
Represents the four-byte ASCII representation of the flash
memory checksum
memory checksum
543 Display Boot Checksum
Command #543 displays the boot ROM checksum.
Reader response:
BCKS xxxx
where xxxx represents the four-byte ASCII representation of the boot ROM check-
sum.
sum.
560 Request Sensor Status Change
Command #560 displays the sensor status change reporting. Status change reporting
may be disabled by command #82N Select Input Status Change Report Option.
may be disabled by command #82N Select Input Status Change Report Option.
Reader response:
SSTC E<0 to 1>M<0 to 3>
where
E0
Input status change reports disabled (factory default)
E1
Input status change reports enabled
M0
Reporting disabled (factory default)
M1
Changes on input0 reported
M2
Changes on input1 reported
M3
Changes on either input reported