TransCore 05531 User Manual

Commands

7-45

characters to be entered. When setting the serial number, skip the fourth (middle)
character of the seven-character number shown on the reader product label.

Note: Once assigned, the serial number is preserved during power-down and the
loading of default parameters.

Reader response:

Done

696S...S Store Hardware Configuration String

Command #696S...S stores hardware configuration information into reader mem-
ory.

The hardware configuration string is assigned according to the following format:

696S...S

where S...S is the hardware configuration string that may contain as many as 20
uppercase or lowercase ASCII alphanumeric characters.

Note: Once assigned, configuration information is preserved during power-down and
the loading of default parameters.

Reader response:

Done

Auxiliary Reader Control — Command Group 8

Group 8 commands provide control of reader functions, such as the sense input lines.

82N Select Input Status Change Report Option

Command #82N selects the input lines to be monitored to report any change in input
status. The enabled input lines are monitored for any changes in the logic states. If a
change is detected, the reader generates an input status change message and treats it as
a tag ID. If the auxiliary information option is enabled, the input status field displays
the current input values. The value for N specifies the report options as shown in
Table 7-21.