HeathCo LLC WLTX209 User Manual
7
HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Operation (continued)
2
Setting the wireless push
button
button
NOTE: The two push buttons included in this kit will come
factory set for front and back doors. A decal on the rear of
the push button will indicate its setting.
factory set for front and back doors. A decal on the rear of
the push button will indicate its setting.
The wireless push button (C) has two options for tune
selection: Play the selected “FRONT” door musical
tune or play the “REAR” door designated tune (Ding).
selection: Play the selected “FRONT” door musical
tune or play the “REAR” door designated tune (Ding).
Ƒ Remove the single jumper inside the push
button (C) to play the selected musical tune.
Ƒ Add the single jumper inside the push
button (C) to play only the Ding tune.
Remove jumper to
Add jumper to set
set as the “FRONT” door
as the “REAR” door
3
Selecting a push button tune
The doorbell (A) has different selectable tunes for push
buttons (C). The push button (C) set as the “REAR”
push button (C) will only play Ding (one note tune). The
push button (C) set as the “FRONT” push button (C) will
either Ding-Dong (two note tune) or Westminster (eight
note tune).
buttons (C). The push button (C) set as the “REAR”
push button (C) will only play Ding (one note tune). The
push button (C) set as the “FRONT” push button (C) will
either Ding-Dong (two note tune) or Westminster (eight
note tune).
Ƒ Press and release the “TUNE” button on the
doorbell (A) until desired tune is heard.
NOTE: All doorbell models are designed to work with up
to 10 wireless push buttons (sold separately).
to 10 wireless push buttons (sold separately).
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
different tunes no matter how many push buttons are used.
Mailbox alert
Front door push button
(sold separately)
Rear door push button
(sold separately)
Doorbell tune
Beep-Beep
Ding-Dong or Westminster
Ding
4
Using the sensor
The sensor (B) will activate the doorbell (A) each time
the mailbox is opened. The doorbell (A) will sound a
“Beep-Beep” tone and the “envelope” icon will glow.
The “envelope” icon will continue to glow until one of
the following steps is done:
the mailbox is opened. The doorbell (A) will sound a
“Beep-Beep” tone and the “envelope” icon will glow.
The “envelope” icon will continue to glow until one of
the following steps is done:
Ƒ Press and release the button on the side of the
sensor (B) or...
Ƒ Quickly press and release the button on the side
of the doorbell (A) twice.
NOTE: If the button on the side of the sensor is pressed
to reset the “envelope” icon, there is a 10 second delay
before the sensor will be able to re-activate the chime.
This delay will ensure that the mailbox is closed before the
sensor will be able to acitvate the doorbell again.
to reset the “envelope” icon, there is a 10 second delay
before the sensor will be able to re-activate the chime.
This delay will ensure that the mailbox is closed before the
sensor will be able to acitvate the doorbell again.
A
A
B
C