Data Critical Corporation 02DR-10100 User Manual
WMTS OPENNET LAN PROGRAMMING AND DIAGNOSTICS
PatientNet Administrator’s Guide, v1.04, 10001003-004, Revision B
103
All information contained herein is subject to the rights and restrictions on the title page.
Designating a Device Master
The Device Master is the system on the OpenNet LAN that controls the user defined
parameters.
parameters.
To designate the system as the Device Master:
1. Click the Master button to toggle between Enabled and Disabled (see fig. 60
on page 101).
•
•
Selecting Enabled defines the system as the Device Master.
Note:
Only one Device Master is allowed on the network at one time. To enable a
new Device Master, you must first disable the original Device Master, then
enable the new Device Master.
new Device Master, you must first disable the original Device Master, then
enable the new Device Master.
•
Selecting Disabled defines the system as not being the Device
Master.
2. Click the Exit button to close the OpenNet LAN screen and return to the
Service screen.
Printing the Device Master Report
The Device Master Report displays the global, as well as individual, parameters for
each Access Point.
each Access Point.
To print the Device Master Report:
1. Click the Print DM button on the OpenNet LAN screen to print the Device
Master Report.
2. Click the Exit button to close the OpenNet LAN screen and return to the
Service screen.