Data Critical Corporation 02DR-10100 User Manual
WMTS OPENNET LAN PROGRAMMING AND DIAGNOSTICS
104
PatientNet Administrator’s Guide, v1.04, 10001003-004, Revision B
All information contained herein is subject to the rights and restrictions on the title page.
Configuring the Device Master
You can configure global parameters for the Device Master in the OpenNet LAN Con-
figuration screen.
figuration screen.
To configure the OpenNet LAN parameters:
Note:
In order to view the LAN button, the Central Station must be designated as
the device master (see “Designating a Device Master” on page 103).
the device master (see “Designating a Device Master” on page 103).
1. Click the LAN button to open the OpenNet LAN Configuration screen (fig.
61).
Fig. 61. OpenNet LAN Configuration Screen
2. Click the Ext Sync button to toggle the Access Point synchronization source
between Yes and No.
•
•
Selecting Yes will designate an external source for providing the synchroni-
zation of each Access Point.
•
Selecting No will designate a single Access Point the task of providing its
own synchronization.
Note:
You can only set the Ext Sync to No for a single Access Point system.