Park Air Systems Limited B6350 User Manual
REAR PANEL
The rear panel's controls, indicators, and connectors are shown in Fig. 1-3 and described in the following
paragraphs.
paragraphs.
Power Switch
A 2-way rocker switch used to switch on, and switch off, power to the transmitter's circuitry.
l
= On
WARNING!
When the POWER SWITCH is set to the Off position, lethal voltages are still present in the
transmitter's internal power supply circuitry. To ensure safe working, the ac and dc input
supplies must be disconnected from the transmitter.
transmitter's internal power supply circuitry. To ensure safe working, the ac and dc input
supplies must be disconnected from the transmitter.
AC Input Connector
A 3-pole IEC chassis plug for connecting the ac input
supply. The plug has an integral 20 mm fuse (F2) that
protects the Line (L) input circuit. The fuse is rated at
4 amps. Detailed instructions regarding fuse types,
and connecting the ac supply are given in the
installation chapter on page 26.
supply. The plug has an integral 20 mm fuse (F2) that
protects the Line (L) input circuit. The fuse is rated at
4 amps. Detailed instructions regarding fuse types,
and connecting the ac supply are given in the
installation chapter on page 26.
Caution!
Before connecting an ac input supply to the
transmitter, the ac input taps must be set to suit
the local mains supply (see page 22).
transmitter, the ac input taps must be set to suit
the local mains supply (see page 22).
Section 1
T6T Transmitter User Guide
Page 14
(DEV083-02)
Fig. 1-3. Rear Panel
= Off
Fig. 1-4. AC Mains Connector
(SA3536)