Digital Monitoring Products Inc PC0132 User Manual

The keypads can be programmed into the control panel by entering the serial number 

in Device Setup panel programming, or alternatively using the wireless keypad 

association operation. A maximum of 4 keypads may be used with the panel.

Program the keypad as a device in Device Setup during panel programming. At the 

serial number prompt, enter the eight-digit serial number. Continue to program the 

device as directed in the panel programming guide.
Note: If the keypad serial number is entered manually, the Wireless Keypad 

Association operation is not required.

To enable association operation in the XTL Series panel, press the XTL Series RESET 

button 3 times within 12 seconds allowing 3 seconds between each press of the reset 

button. When in keypad association, the XTL Series Red and Green logo LEDs turn on 

steady.

To enable association operation in the XR100/XR500, XR150/XR350/XR550 or XT30/

XT50 panel, reset the panel 3 times within 12 seconds. Allow the keypad bus 

Transmit/Receive LEDs to turn back on between each reset.

To enable association operation in the keypad use the Keypad Wireless Survey 

feature.

For 60 seconds the panel listens for wireless keypads that are in the Installer Options 

Menu (3577 CMD) and have not been programmed, or associated into another panel.

Those keypads are assigned to the first open device position automatically based upon 

the order in which they are detected.

Access the Options menu through the carousel menu. While in the Option display, 

press the Installer Options icon and enter the code 3577 (INST) at the keypad and 

press CMD.

KPD KPD  KPD
OPT DIAG RF   STOP

Press KPD RF to start the RF communication survey test. 

The keypad Power/Armed LED turns Red, indicating 

communication has not been established with the panel 

receiver. When successful communication has been 

established, the keypad Power/Armed LED turns Blue.

RF SuRvey