Digital Monitoring Products Inc PC0132 User Manual

Keypad Options and Keypad Diagnostic menus allow installing and service technicians 

to configure and test keypad operation.

Access the Options menu through the carousel menu. While in the Option display, 

press the Installer Options icon and enter the code 3577 (INST) at the keypad and 

press CMD.
The Options menu allows you to set the keypad address, select Supervised or 

Unsupervised mode, selectively enable the Panic keys, Bypass, Request-to-Exit, and 

set entry card options.
Note: All programming options display on all keypad models, however, actual 

operation for some programming options is restricted to the appropriate model.

KPD KPD KPD
OPT DIAG RF    STOP

To program keypad options, press KPD OPT.

Enter a custom message of up to 16 characters to appear 

on the keypad display top line whenever that line is not 

used for any other purpose. Press any Select area to clear 

the current message and enter a new custom display.

ARm PAnIc KeyS:
*Pn *em  *FI

Use this option to configure the Panic Icons. To enable 

or disable a Panic Icon, press the icon name: PN (Panic), 

EM (Emergency), and FI (Fire). Once the panic icon is 

enabled, an asterisk displays next to the description and 

the respective Panic icons display for the user. Refer to 

the Panic Icon Options section in this document.

nO OF uSeR cODe 

DIGITS:    

5

The keypad recognizes user codes from 4 to 10 digits 

in length. Press the display to enter the user code digit 

length being used by the panel. Default is 5. 

When searching the bit string for the user code, the digits 

are identified and read from left to right.

All?: 

  nO yeS

DelAy:    

2

Select the number of seconds (1-9) the keypad should 

wait when an area system displays ALL? NO YES during 

arming/disarming or a HOME/SLEEP/AWAY system waits 

during arming only. If NO or YES, or HOME, SLEEP, or 

AWAY is not manually selected before the delay expires, 

the keypad automatically selects the YES or the AWAY 

key. Enter zero (0) to disable this feature. The delay also 

occurs when any credential is presented for arming the 

HOME/SLEEP/AWAY system.

DeFAulT KPD mSG: