Digital Monitoring Products Inc PC0181 User Manual
Digital Monitoring Products
XTLplus Installation and Programming Guide
32
ZONE INFORMATION
types.
Auxiliary 1, Auxiliary 2, Fire Verify, or Arming. Press the Back Arrow key to display
the previous zone types.
If you select Blank, Night, Day, Exit, Auxiliary 1, or Auxiliary 2 as the Zone Type,
the zone must be assigned to an area. If you select Fire, Panic, Emergency, or
Supervisory as the Zone Type, these are 24-hour zones that are always armed and
no area assignment is needed. Press COMMAND to continue.
Refer to the Appendix for zone type specifications and descriptions.
33.6
Arming Zone Assignment
For Area systems, this option specifies the areas to be armed by the Arming Type
zone. Press the appropriate number keys on the keypad to assign areas 1 to 6.
When disarmed, all programmed areas are disarmed.
For All/Perimeter systems, choose PERIM or ALL. For Home/Away systems, choose
HOME, SLEEP, or AWAY.
Perimeter/All - Specify whether the arming zone arms just the Perimeter (PERIM)
or the Perimeter and Interior areas (ALL) for All/Perimeter systems. When
disarming, all areas are disarmed.
HOME/SLEEP/AWAY - Specify whether the arming zone arms the Perimeter (HOME),
the Perimeter and Interior (SLEEP), or all three areas (AWAY). When disarming, all
areas are disarmed.
Arming zone operation
If a bad (faulted) Priority zone is in the area being armed by an Arming zone,
the arming is stopped. If there are no Priority zones, or they are all in a normal
condition, the following applies:
When a non-Priority zone is bad when an area is armed with a keyswitch on an
Arming zone, the arming is delayed for five seconds. If, during the five-second
delay, the keyswitch is turned to disarm, the arming stops. If the keyswitch is held
in the arming position for the full five seconds, the bad zone is force armed and
the area is armed.
The ability to stop the arming does not apply if a wireless arming device is being
used. Refer to the Appendix.
Note: Arming from a zone, Wi-Fi, or Remote Link is not affected by this operation.
33.7
Area Assignment
To change the default area, press any select key.
For Area systems, enter the area number from 1 to 6 where this zone is
being assigned.
For All/Perimeter systems, choose INTERIOR or PERIMETER.
For Home/Away systems, choose INTERIOR, PERIMETER, or BEDROOMS.
• INT (Interior) - Assigns the zone to area 2, Interior.
• BDRM (Bedroom)- Assigns the zone to area 3, Bedrooms. This option is only
displayed in Home/Away systems.
• PERIM (Perimeter) - Assigns the zone to area 1, Perimeter.
33.7.1 Style
This option specifies the style for the arming/disarming operation. The default for
STYLE: is TGL (toggle). Pressing any select key displays the STYLE options. To view
more style options press the command key. The following is a description of the
action for each option condition.
TGL (Toggle) - When the zone changes from normal to shorted, the programmed
areas toggle between the armed or disarmed condition. When restored to normal,
no action occurs. When the zone is opened from a normal (disarmed) state, a
trouble is reported. When opened from a shorted (armed) state, an alarm is
reported and the zone is disabled until you disarm the area(s) from either a keypad
or Remote Link™ computer.
ARM - When the zone is shorted, the programmed areas are armed. When restored
to normal, no action occurs. When the zone is opened from a normal (disarmed)
state, a trouble is reported. When opened from a shorted (armed) state, an
alarm is reported.
DIS (Disarm) - When programmed as an Area system, a short will disarm the
programmed areas. When programmed as a ALL/PERIM or HOME/AWAY system, a
short will disarm ALL areas. When restored to normal, no action occurs. When the
zone is opened from a normal (disarmed) state, a trouble is reported.
STEP - When programmed as an area system, a short will arm the areas and beep
the keypads once. When programmed as ALL/PERIM or HOME/AWAY, on the first
short HOME will arm and beep the keypad once. On the second short, SLEEP will
arm and beep the keypads twice. On the third short, AWAY will arm and beep the
AREA:
ARM AREA: PERIM
PERIM
ALL
HOME SLEEP AWAY
INT
PERIM
AREA: -
INT BDRM PERIM
STYLE: TOGGLE
TGL ARM DIS STEP