Nautel Maine Inc VS300 User Manual
VS300 Operations and Maintenance Manual
Operating the transmitter
Page 2-78
Issue 0.1 2011-03-11
Configuring ARM watchdog
From the front panel UI, you can enable or disable the ARM watchdog feature. This feature, when
enabled, monitors communication between the ARM processor and the DSP processor on the
exciter/control PWB. If communication is lost for more than 30 seconds, the transmitter will initiate
an alarm and reboot the ARM. To view the
enabled, monitors communication between the ARM processor and the DSP processor on the
exciter/control PWB. If communication is lost for more than 30 seconds, the transmitter will initiate
an alarm and reboot the ARM. To view the
ARM Watchdog
screen, select
System Settings -> ARM
Watchdog
from the
Main Menu
(see
Figure 2.71: ARM Watchdog Screen
Use the up and down buttons to toggle between
Enabled
and
Disabled
. Press the accept
(checkmark) button to save the change. Press cancel (
X
) to discard changes and return to the previous
menu.
Note:
ARM watchdog configuration is only available using the front panel display.