UTC Fire & Security Americas Corporation Inc 680F-PIR User Manual
P/N 466-1725 • RevD.07 • 25Feb14
1 / 6
PET Immune SAW PIR Motion Sensors
Installation Sheet
Installation Sheet
Description
This is the Installation Sheet for SAW PIR and PET Immune
Motion Sensors. See Table 1.
Motion Sensors. See Table 1.
Table 1: Motion Sensors
60-807-95R
Pet Immune SAW PIR Motion Sensor
60-807-01-95R
Pet Immune SAW PIR Motion Sensor with Lithium
Battery.
Battery.
60-807-02-95R
Pet Immune SAW PIR Motion Sensor with 1.5 V
Lithium Batteries.
Lithium Batteries.
A motion sensor (passive-infrared or PIR) detects movement
within a specific area by sensing the infrared energy emitted
from a body as it moves across the sensor’s field of view.
When this motion is detected, the sensor transmits an alarm
signal to the control panel.
within a specific area by sensing the infrared energy emitted
from a body as it moves across the sensor’s field of view.
When this motion is detected, the sensor transmits an alarm
signal to the control panel.
Figure 1: Pet Immune SAW PIR Motion Sensors
Use these motion sensors to protect locations where
door/window sensors are impractical or not needed. For
example, use a motion sensor to protect large areas or open
floor plans. Motion sensors also provide backup protection for
door/window sensors.
door/window sensors are impractical or not needed. For
example, use a motion sensor to protect large areas or open
floor plans. Motion sensors also provide backup protection for
door/window sensors.
The Pet Immune SAW PIR 60-807 utilizes advanced signal
processing, a new custom designed lens, and a new custom
designed sensing element. The combination of these
improvements provides false alarm immunity for pets with a
combined weight of up to 40 pounds while still providing
superior human catch performance.
processing, a new custom designed lens, and a new custom
designed sensing element. The combination of these
improvements provides false alarm immunity for pets with a
combined weight of up to 40 pounds while still providing
superior human catch performance.
These wireless motion sensors include the following features:
•
35 by 40 ft. (10.6 m by 12 m) coverage area.
•
Three minute transmitter lockout time after an alarm that
helps extend battery life.
helps extend battery life.
•
Cover-activated tamper (optional wall-activated tamper is
included).
included).
•
Supervisory signals transmitted every 64 minutes to the
control panel.
control panel.
•
Sensor low battery reports (trouble) to the control panel.
•
Field-selectable sensitivity options.
Installation
Installation Guidelines
•
Temporarily place the sensor in its intended mounting
location. Program and final test the sensor before
permanently mounting it.
location. Program and final test the sensor before
permanently mounting it.
•
If possible, locate sensors within 100 ft. (30.5 m) of the
panel. While a transmitter may have a range of 500 ft.
(152 m) or more out in the open, the environment at the
installation site can have a significant effect on
transmitter range. Sometimes a change in sensor
location can help overcome adverse wireless conditions.
panel. While a transmitter may have a range of 500 ft.
(152 m) or more out in the open, the environment at the
installation site can have a significant effect on
transmitter range. Sometimes a change in sensor
location can help overcome adverse wireless conditions.
•
The recommended mounting height is 7 1/2 ft.
•
Position the sensor to protect an area where an intruder
would be most likely to walk across the detection pattern
See Figure 2.
would be most likely to walk across the detection pattern
See Figure 2.
Figure 2: Overhead Detection Path
•
Mount the motion sensor on a rigid surface which is free
from vibrations.
from vibrations.
•
Do not mount the sensor near duct work or other large
metallic surfaces which may affect the RF signals (see
RF Testing). Actual acceptable transmitter range should
be verified for each installation.
metallic surfaces which may affect the RF signals (see
RF Testing). Actual acceptable transmitter range should
be verified for each installation.