UTC Fire & Security Americas Corporation Inc 723-TCVR User Manual

1

ITI Part No. 60-764-01-95R

Document Number: 466-1565-01 Rev. A
June 2000

The SuperBus 2000 RF Receiver Module is a UL listed 
device that adds or expands panel wireless zone capacity. 
See the specific panel Installation Instructions for complete 
UL requirements for the system you are installing.

The receiver is compatible with all ITI 319.5 MHz (crystal 
and SAW) Learn Mode

™

 wireless sensors and touchpads, 

and can be mounted inside the panel cabinet or located up to 
2,800 feet away from the panel (see Table 2). It receives 
information from wireless sensors and touchpads then sends 
the data to the panel via the SuperBus 2000 digital data bus. 
Power for the module is provided by the panel.

Receivers are available in 16-zone (-16Z), 32-zone (-32Z), 
or panel maximum (-MAX) capacities.

SuperBus 2000 panels have the ability to auto-address mod-
ule unit numbers. When the panel is powered up, the panel 
automatically reads the unique SuperBus 2000 device ID 
number and assigns a unit number to the module. This elim-
inates manually setting DIP switches and the chance of 
identical unit number conflicts.

SuperBus panels communicate with SuperBus 2000 
modules but require the module unit number to first be set 
manually using DIP switches.

❑

Spatial diversity, which minimizes wireless signal nulls 
or dead spots.

❑

Compatibility with all ITI 319.5 MHz (crystal or SAW) 
Learn Mode ™ wireless sensors, touchpads, and sirens.

❑

Backward compatibility with SuperBus panels.

❑

1,500 feet nominal, open air receiving range.

Figure 1 shows the receiver module components and Table 
1 describes them.

Antennas

Provide communication with 
wireless devices.

SuperBus 2000 Device 
ID Number Label

Identifies unique module 
SuperBus 2000 device ID 
number (SuperBus 2000 panels).

Receiver Status LED

On continuously when the 
receiver is powered. Flashes 
when an RF signal is received.

Unit Number DIP 
Switches

Used for manually setting unit 
numbers (SuperBus panels).

Terminal Strip

Used for power and bus 
connections to panel.

ID: XXXXXXXX