UTC Fire & Security Americas Corporation Inc 801-IXT User Manual
Simon XT
User Manual
28
Top-level menus
This section explains the top-level menus, with the exception of system programming, which makes up the
bulk of the menus and can be found in its own section,
bulk of the menus and can be found in its own section,
Set clock
If the panel loses both AC and battery power, then upon restoring power the system time will default to
midnight and blink, indicating it has not been set correctly. Your installer can set your system time to display in
either 12-hour or 24-hour format.
midnight and blink, indicating it has not been set correctly. Your installer can set your system time to display in
either 12-hour or 24-hour format.
Time of day format is HH:MMx
Where:
HH = 01 to 12 (12-hour format) or 00-23 (24-hour format)
MM = 00 to 59
x = a or p (12-hour format) or none (24-hour format)
To reset the clock:
1. Scroll up/down until the display shows Set Clock.
2. Press Enter.
3. The display shows Enter Code.
4. Enter your master code with numeric keys. Press Enter.
5. Press Enter again. The display now flashes the hours.
6. Scroll up/down to set the hours.
7. Press the Enter key to accept. The display now flashes the minutes.
8. Scroll up/down to set the minutes.
9. Press the Enter key to accept. The display is now flashing the AM/PM.
10. Scroll up/down to set the AM/PM.
11. Press Enter to accept. The display now shows the current time, and stops flashing.
12. Press STATUS twice to exit.