UTC Fire & Security Americas Corporation Inc 801-IXT User Manual

Simon XT

User Manual

To enable or disable the Special chime feature:

1. Scroll up/down until the display shows Chime.

2. Press Enter. The current setting will flash.

3. Scroll up/down to toggle Special chime on/off.

4. Press Enter. The setting will stop flashing.

5. Press STATUS to exit.

An outlined bell icon will appear in the display when Special chime is enabled.

Note:   This menu will not appear if Special chime sensors are not in your system.

This menu lets you run sensor and communication tests, and initiate a phone call from the panel to the 
Enterprise Downloader. For more information, see Chapter 5 

This menu item is a read-only display of the system’s firmware version.  Press Status to exit.

To adjust the Contrast of the display, do the following:

1. Scroll up/down to Contrast.

2. Press Enter.

3. Scroll up/down to increase and decrease the contrast setting. (There are eleven contrast levels.)

4. Press STATUS to save the setting and exit.

Note:  Changes in contrast are more noticeable when not looking at the display straight on.