UTC Fire & Security Americas Corporation Inc 801-IXT2 User Manual
GE
Security
Simon XT TableTop Quick
Operation Guide
Content
Programming 4
Contact information
For contact information see our Web site:
www.gesecurity.com.
www.gesecurity.com.
Operation
Use this document to quickly begin operating your Simon
XT TableTop security system (model 600-1054-95R-ITT).
Refer to your Simon XT TableTop User Manual for full
operating details and programming options.
XT TableTop security system (model 600-1054-95R-ITT).
Refer to your Simon XT TableTop User Manual for full
operating details and programming options.
Note:
The default master code is 1-2-3-4 when the security
system is shipped from the factory. You should change your
code after your system is installed.
code after your system is installed.
To operate the security system:
• Use the front panel buttons to arm/disarm the system
when you enter or exit your home and to determine
which sensors are active and the system status.
which sensors are active and the system status.
• Use the three fast action keys to communicate with the
central monitoring station to report police, fire, or
emergency alarms.
emergency alarms.
• Use a combination of the panel buttons and the display
menu to program certain user features. This method is
used by your installer to establish your system
configuration. (Refer to your Simon XT TableTop User
Manual.)
used by your installer to establish your system
configuration. (Refer to your Simon XT TableTop User
Manual.)
Table 1 below describes the panel keys and features.
Table 1: Panel keys and features.
Control Description
Piezo siren
Provides alarm beeps and status beeps.
LCD display
Provides a 2 x 16 character array that displays a
variety of phrases and icons.
variety of phrases and icons.
Doors+Windows Press
to
arm perimeter sensors.
Motions
Press to arm interior sensors.
Disarm
Press to turn off intrusion/burglary protection for your
system. Only intrusion/burglary sensors are disarmed.
Environmental sensors, such as smoke and carbon
monoxide detectors, stay active at all times.
system. Only intrusion/burglary sensors are disarmed.
Environmental sensors, such as smoke and carbon
monoxide detectors, stay active at all times.
Status
Press to determine system status.
Silent
Press to silence exit beeps when arming.
Bypass
Press to bypass a sensor.
Emergency (cross)
Police (star)
Fire (flame)
Press and hold for 2 seconds (or press twice quickly)
to call the central monitoring station and notify them
of a nonmedical call for help.
to call the central monitoring station and notify them
of a nonmedical call for help.
Microphone
Use to communicate with the central monitoring
station after an alarm.
station after an alarm.
Scroll up/scroll
down arrows
down arrows
Press to scroll through lists of similar items.
© 2010 GE Security, Inc.
P/N 466-2388 • REV A • ISS 18MAY10