UTC Fire & Security Americas Corporation Inc 984-PANIC User Manual
2 / 5
Personal Panic Device Installation Sheet
center of the two marks as shown
below.
below.
4.
Attach the band to the clasp. Feed
the band through the retainer
opening and close the lever to lock
the band in place. Repeat for the
other side.
Pendant
The Personal Panic Device can be
worn as a pendant by removing the
wristband and installing the pendent
adaptor components and lanyard in the
following manner:
1.
Remove the two screws on the
back of the Personal Panic
Device.
back of the Personal Panic
Device.
2.
Carefully separate the cover and
base.
base.
3.
Remove the wristband.
4.
Separate the components from the
pendant adaptor kit and discard
the circular center section.
pendant adaptor kit and discard
the circular center section.
5.
Insert the pendant loop adapter
into the small loop end of the
lanyard.
into the small loop end of the
lanyard.
6.
Insert the plugs into the base and
reattach the cover and base.
Note: Compress the panic button
and base assembly together
before tightening the screws.
reattach the cover and base.
Note: Compress the panic button
and base assembly together
before tightening the screws.
Programming
Review the following information for
adding a Personal Panic Device to the