Biolog-id SSTRBIOLOGID User Manual
Smart Storage for fridge : user manual
Backup date
12/05/2017 17:14:00
Version
0.10
Author
Loïc Marouteau
Manual validation date: 19/04/2017
25 sur 29
To clean the SST-R and maintain it in good working condition, we advise following the
instructions below.
instructions below.
Before cleaning the SST-R, always switch it to maintenance mode (cf HMI
manual). This rule also applies to maintenance operations.
The SST-R materials may be damaged if unsuitable cleaning tools, high
pressure washers, pressurised water or water jets are used.
Never use cleaning products containing the following:
manual). This rule also applies to maintenance operations.
The SST-R materials may be damaged if unsuitable cleaning tools, high
pressure washers, pressurised water or water jets are used.
Never use cleaning products containing the following:
-Acids or halogen compounds (chlorides, bromides, halides)
-Strongly acidic salts such as formic acid or sulphonic amino acid descalers
- Drain unblockers, hydrochloric acid, silver cleaners
- Chlorine
- Abrasive compounds or scourers (scouring powder, steel wool)
- Polishing products, waxes, bleaching agents
It is essential that the manufacturers’ instructions for the cleaning product
regarding temperature, dosage, acting time, etc. used are followed to the
letter.
-Strongly acidic salts such as formic acid or sulphonic amino acid descalers
- Drain unblockers, hydrochloric acid, silver cleaners
- Chlorine
- Abrasive compounds or scourers (scouring powder, steel wool)
- Polishing products, waxes, bleaching agents
It is essential that the manufacturers’ instructions for the cleaning product
regarding temperature, dosage, acting time, etc. used are followed to the
letter.
After completing all the cleaning operations, check that the device works.