Biolog-id SSTRBIOLOGID User Manual
Smart Storage for fridge : user manual
Backup date
12/05/2017 17:14:00
Version
0.10
Author
Loïc Marouteau
Manual validation date: 19/04/2017
23 sur 29
NOTE UV is the voltage of the AC network before application of the test level.
The PRD-7130100C, PRD-7130110C, PRD-7130120C and PRD-7130130C models use the 13.56 MHz frequency.
The frequency band is 13.553 - 13.567 MHz in accordance with the ISO 15693 standard. The modulation type is ASK and the
RF mode is TX/RX.
Apparent power is 100 mW.
The PRD-7130100C, PRD-7130110C, PRD-7130120C and PRD-7130130C models use the 13.56 MHz frequency.
The frequency band is 13.553 - 13.567 MHz in accordance with the ISO 15693 standard. The modulation type is ASK and the
RF mode is TX/RX.
Apparent power is 100 mW.
4.3 Contraindications
As a preventive measure, it is recommended that people fitted with pacemakers do not use
the SST-R.
the SST-R.
To be corroborated and added to the FMECA
4.4 Warning for users in United States
Federal Communication Commission Interference
Statement 47 CFR Section 15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NO UNAUTHORIZED MODIFICATIONS
47 CFR Section 15.21
CAUTION:
This equipment may not be modified, altered, or changed in any way without
signed written permission from Biolog-id. Unauthorized modification may void the
equipment authorization from the FCC and will void the Biolog-id warranty.
equipment authorization from the FCC and will void the Biolog-id warranty.
This device complies with FCC RF radiation exposure limits set forth for general population
(uncontrolled exposure). This device must be installed to provide a separation distance of at
least 20cm from all persons and must not be collocated or operating in conjunction with any
other antenna or transmitter.
(uncontrolled exposure). This device must be installed to provide a separation distance of at
least 20cm from all persons and must not be collocated or operating in conjunction with any
other antenna or transmitter.