Unique Broadband Systems Ltd. DRU2KW User Manual

Manual No. x75mk3-11

x75-man-Rev11-0815.indd

When the Alarm Matrix menu item is selected the following two section page will 

be displayed.

The top section presents 5 tabs where limits relating to temperature, voltage, current 

and minimum number of rectifiers (Other Alarms tab) can be defined.  Note that as 

the X75 has no Analog inputs the Analog Input Alarm tab, while displayed when 

selected, should be left as default.

The bottom section is used to route the various alarms to alarm relays, front panel 

LEDs, Email targets and an audible buzzer.  Alarms may be routed to single or 

multiple destinations by selecting the desired check boxes.

The following applies to all tabs and matrix configuration.

To upload any changes, click on UPLOAD.  An administrator level password is 

required.

To get default values for the parameters, click on DEFAULT.  These will not be 

applied unless UPLOAD is clicked.

When resetting to default it is important that the correct system voltage is selected 

when asked.