RF Engineering & Energy Resource LLC KI-GSM904 User Manual
7
It means that the latest log is emergency alarm
8. GSM network signal inquiry
User can check the GSM signal before use on the main panel, so that the system can
send alarm information successfully without any delay or missing.
Command:[*]→[9]→[4]→[*]
User can check the GSM signal before use on the main panel, so that the system can
send alarm information successfully without any delay or missing.
Command:[*]→[9]→[4]→[*]
You will see the strength number on the LCD. If the number is less than 10, it means
signal is bad. If the number is more than 30, it means no GSM signal. Bigger number
means stronger signal for the numbers between 10 and 30
signal is bad. If the number is more than 30, it means no GSM signal. Bigger number
means stronger signal for the numbers between 10 and 30
9.Zone type setting
User can set all zones with any kind of different zone type
Command:[#]→[8]→[A]→[B]→[#]
A=(1-104): zone number
B=(0-8): 8 kinds of different zone type
0: inactive
1:burglarproof alarm
2:home arm
3: emergency alarm
4: multi checked
5: delay alarm
7: double trigger
8: doorbell
0: inactive
1:burglarproof alarm
2:home arm
3: emergency alarm
4: multi checked
5: delay alarm
7: double trigger
8: doorbell
Zone number
1-98
99
100
101-104
Wireless/wire zones
wireless zone 1-wireless zone 98
useless
useless
4 wire zone