Manualsbrain.com
  1. Manuals
  2. Brands
  3. Olympus Winter & Ibe GmbH
  4. ESG200
  5. User Manual

Olympus Winter & Ibe GmbH ESG200 User Manual

Download
Page of 110
45
System settings
5.5.4 Touch Tone
Use this function to turn on or off the audible feedback when tapping the touch screen. As a 
default setting the audible feedback is turned off.
To turn the audible feedback on or off proceed as follows:
1.  Tap [MENU] on the All Screen.
The screen [Select Menu] is displayed.
2.  Tap [Touch Tone].
 - The screen [Touch Tone] is displayed.
 - The current setting is highlighted.
3.  Tap [On] or [Off] to turn the touch tone on or off.
The selected choice is highlighted.
4.  Tap [OK].
The screen [Select Menu] is displayed.
5.5.5 Autostart Setup
Use this function to set a time delay for the feature Autostart. With a time delay the 
electrosurgical generator does not activate immediately when the HF instrument touches the 
tissue but waits until the specified time has expired.
The time delay is specified in seconds. It is possible to enter a value between 0.0 and 9.9 
seconds. The default setting is 1.0 s.
 - The Autostart feature is available only for the bipolar coagulation mode SoftCoag.
 - Precondition: The Autostart feature is assigned to the BIPOLAR output socket. Refer to 
section “Foot switch assignment and Autostart” on page 41.
To set the time delay for the Autostart feature proceed as follows:
1.  Tap [MENU] on the All Screen.
The screen [Select Menu] is displayed.
2.  Tap the arrow button [Next] to browse to the next page of the screen [Select Menu].
3.  Tap [Autostart Setup].
 - The screen [Autostart Setup] is displayed.
 - The current time delay is displayed in seconds.
4.  Tap [+] or [−] to modify the current setting.
5.  Tap [OK] to save the current setting.
The screen [Select Menu] is displayed.
5.5.6 Software Version
This function displays the currently installed software version of the electrosurgical 
generator.
To display the software version proceed as follows:
1.  Tap [MENU] on the All Screen.
The screen [Select Menu] is displayed.
2.  Tap the arrow button [Next] to browse to the next page of the screen [Select Menu].
3.  Tap [Software Version].
The currently installed software version is displayed.
4.  Tap [OK] to return to the screen [Select Menu].
DRAFT 
– 
2017-01-17