Olympus Winter & Ibe GmbH ESG200 User Manual

Neutral electrode operation

Figure 7.3 Connecting the plug of the neutral electrode

• Insert the plug of the neutral electrode into the neutral electrode socket on the front panel

of the electrosurgical generator.

7.5.2 Connecting a neutral electrode without a pre-attached cable

To connect a neutral electrode without a pre-attached cable proceed as follows:

• Refer to the instructions for use of the connecting cable and of the neutral electrode.

Figure 7.4 Fixing the neural electrode to the connecting cable

1. Lift the locking lever of the connecting cable.

2. Position the tab of the neutral electrode evenly between the clamp jaws of the

connecting cable.

3. Completely push down the locking lever to lock the clamp.

4. Insert the plug of the connecting cable into the neutral electrode socket on the front

panel of the electrosurgical generator.

DRAFT

–

2017-01-17