Cisco T3 kit CAB-T3-KIT5= User Manual
Product codes
CAB-T3-KIT5=
Page 6 of 28
78-19803-02 Cisco TelePresence System T3 System Assembly Guide, December 2011
3.
Then place the right bottom frame on the right side of
the center bottom frame. Fasten with 4 nuts type M6.
Repeat for left side.
the center bottom frame. Fasten with 4 nuts type M6.
Repeat for left side.
4.
Make sure that the distance to the wall is constant. If
necessary, mark the position with a piece of tape or
similar.
necessary, mark the position with a piece of tape or
similar.
= Tape
The screws, nuts and plates