Intel S2600JFQ BBS2600JFQ User Manual
Product codes
BBS2600JFQ
Intel®
Server Board S2600JF TPS
BIOS Setup Interface
Revision 1.3
Intel order number G31608-004
99
Setup Item
Options
Help Text
Comments
Reset on CATERR
Enabled
Disabled
When enabled system gets reset upon
encountering Catastrophic Error
(CATERR); when disabled system does
not get reset on CATERR.
encountering Catastrophic Error
(CATERR); when disabled system does
not get reset on CATERR.
This option controls whether the
system will be reset when the
CATERR signal is held asserted,
rather than just pulsed to
generate an SMI.
system will be reset when the
CATERR signal is held asserted,
rather than just pulsed to
generate an SMI.
Reset on ERR2
Enabled
Disabled
When enabled system gets reset upon
encountering ERR2 (Fatal error); when
disabled system does not get reset on
ERR2
encountering ERR2 (Fatal error); when
disabled system does not get reset on
ERR2
This option controls whether the
system will be reset if the BMC’s
ERR2 Monitor times out, that is,
the ERR2 signal has been
continuously asserted long
enough to indicate that the SMI
Handler is not able to service the
condition.
system will be reset if the BMC’s
ERR2 Monitor times out, that is,
the ERR2 signal has been
continuously asserted long
enough to indicate that the SMI
Handler is not able to service the
condition.
Resume on AC
Power Loss
Power Loss
Stay Off
Last state
Reset
System action to take on AC power loss
recovery.
recovery.
[Stay Off] - System stays off.
[Last State] - System returns to the
same state before the AC power loss.
same state before the AC power loss.
[Reset] - System powers on.
Clear System Event
Log
Log
Enabled
Disabled
If enabled, clears the System Event
Log. All current entries will be lost.
Log. All current entries will be lost.
Note: This option is reset to [Disabled]
after a reboot.
after a reboot.
FRB-2 Enable
Enabled
Disabled
Fault Resilient Boot (FRB).
If enabled, the BIOS programs the BMC
watchdog timer for approximately 6
minutes. If the BIOS does not complete
POST before the timer expires, the
BMC resets the system.
watchdog timer for approximately 6
minutes. If the BIOS does not complete
POST before the timer expires, the
BMC resets the system.
O/S Boot Watchdog
Timer
Timer
Enabled
Disabled
If enabled, the BIOS programs the
watchdog timer with the timeout value
selected. If the OS does not complete
booting before the timer expires, the
BMC resets the system and an error is
logged.
watchdog timer with the timeout value
selected. If the OS does not complete
booting before the timer expires, the
BMC resets the system and an error is
logged.
Requires OS support or Intel
®
Management Software.
O/S Boot Watchdog
Timer Policy
Timer Policy
Power Off
Reset
If the OS boot watchdog timer is
enabled, this is the system action taken
if the watchdog timer expires.
enabled, this is the system action taken
if the watchdog timer expires.
[Reset] - System performs a reset.
[Power Off] - System powers off.
Grayed out when the O/S Boot
Watchdog Timer is disabled.
Watchdog Timer is disabled.
O/S Boot Watchdog
Timer Timeout
Timer Timeout
5 minutes
10 minutes
15 minutes
20 minutes
If the OS watchdog timer is enabled,
this is the timeout value used by the
BIOS to configure the watchdog timer.
this is the timeout value used by the
BIOS to configure the watchdog timer.
Grayed out when the O/S Boot
Watchdog Timer is disabled.
Watchdog Timer is disabled.
Plug and Play BMC
Detection
Detection
Enabled
Disabled
If enabled, the BMC is detectable by
OSs that support plug and play loading
of an IPMI driver. Do not enable if your
OS does not support this driver.
OSs that support plug and play loading
of an IPMI driver. Do not enable if your
OS does not support this driver.