Allied Telesis X8106 User Manual

SwitchBlade x8106 Chassis Switch Installation Guide

153

You may attach the grounding wire to the power supply using the supplied 
terminal, shown in Figure 104, or bare wire.

Figure 104. Grounding Wire Terminal

The two methods are described in the following sections:





To attach a grounding wire with the grounding terminal provided with the 
power supply, perform the following procedure:

1. Prepare an adequate length of stranded 10 AWG grounding wire by 

Figure 105. Stripping the Stranded Grounding Wire

You must use stranded wire when using the grounding terminal to 
connect the ground wire to the grounding post. You may not use 
solid wire.

2. Insert the grounding wire into the grounding terminal provided with the 

power supply and use a crimping tool to secure it to the grounding 
terminal. See Figure 106.

Figure 106. Attaching the Stranded Grounding Wire to the Grounding 

Terminal