Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Troubleshooting
88
Check
Remedy
Was a new device connected, or was the con-
nection changed?
nection changed?
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Are many multi-media players connected?
Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
can be connected at the same time.
The device name is not displayed under Device Connections
Check
Remedy
Does the connected device meet the HDMI
CEC standards?
CEC standards?
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
Problems with WirelessHD (EH-TW9100W/EH-TW8100W only)
Cannot project WirelessHD images
Check
Remedy
Does the cable connecting the supplied Wire-
lessHD Transmitter meet the HDMI stand-
ards?
lessHD Transmitter meet the HDMI stand-
ards?
If the cable does not meet the HDMI standards, operations are
not possible.
not possible.
Is WirelessHD set to Off?
When WirelessHD is set to Off from the configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
button.
s
Settings -
Are signals being received within the Wire-
lessHD transmission range?
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
communicate, and view within that range.
s
Is the supplied WirelessHD Transmitter
turned on?
turned on?
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
lessHD Transmitter off?
The WirelessHD cannot communicate with the projector. Check
that the HDMI cable from the AV device is securely connected.
Also, check the range within which the WirelessHD's transceiver
can communicate, and setup within that range.
that the HDMI cable from the AV device is securely connected.
Also, check the range within which the WirelessHD's transceiver
can communicate, and setup within that range.
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
Transmitter flashing alternately?
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Has dust collected in the WirelessHD's vent?
The vent on the base of the projector is the WirelessHD's vent.
Communication may not be possible if dust has collected in the
vent. Install the projector so that dust does not collect in the vent.
Communication may not be possible if dust has collected in the
vent. Install the projector so that dust does not collect in the vent.
Are the projector and the WirelessHD Trans-
mitter facing the correct way?
mitter facing the correct way?
Setup the projector and the WirelessHD Transmitter so that they
are facing each other.
are facing each other.