Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Troubleshooting
89
Interference or distortion appear in WirelessHD images
Check
Remedy
Are signals being received within the Wire-
lessHD transmission range?
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
communicate, and view within that range.
s
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
lessHD Transmitter and the projector?
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
s
Is the reception too low?
If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
s
Set-
tings - WirelessHD - Reception
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
s
Settings - WirelessHD - Reception