Thecus All-Purpose Storage Server N1200BR Leaflet
Product codes
N1200BR
15
Typical Setup Procedure
From the Web Administration Interface, you can begin to setup your N1200 for
use on your network. Setting up the N1200 typically follows the four steps
use on your network. Setting up the N1200 typically follows the four steps
outlined below.
Step 1: Network Setup
From the Web Administration Interface, you can configure the network settings of
the N1200 for your network. You can access the Network menu from the menu
the N1200 for your network. You can access the Network menu from the menu
bar.
For details on how to configure your network settings, refer to Chapter 3:
System Management >
System Management >
Step 2: Create Local Users
Once the network is setup correctly, you can begin to create local users for the
N1200.
N1200.
For more on managing users, go to Chapter 3: System Management >
.
Step 3: Create Folders and Set Up ACLs
Once users are introduced into your network, you can begin to create various
folders on the N1200 and control user access to each using Folder Access Control
folders on the N1200 and control user access to each using Folder Access Control
Lists.
More information on managing folders, see Chapter 4: System Management >
Storage Management >
Storage Management >
To find out about configuring Folder Access Control Lists, see Chapter 4: System
Step 4: Start Services
Finally, you can start to setup the different services of the N1200 for the users on
your network. You can find out more about each of these services by clicking
below:
below: