Thecus All-Purpose Storage Server N1200BR Leaflet

 

 
 

13 

10. Select the N1200 that you like to configure. Click Next. 

 

 

 

11. Login with the administrator account and password. The default account 

and password are both “admin”.  

 

12. If this is your first time setting up the N1200, select Initialize new 

system and click Next to continue. A prompt will appear confirming that 
hard disk data will be erased. Click OK to continue with the installation, or 

Cancel to go back. 

 

 
 

 

 

 

If you are configuring a previous installation, select Configure system. 

Click Next. 

 

13. Name your N1200 and configure the network IP address. If your router is 

configured as a DHCP Server, configuring the N1200 to automatically 

obtain an IP address is recommended. You may also use a static IP 
address and enter the DNS Server address manually. Click Next. 

 

 
 

 

Make sure that your N1200 is on the same IP segment as your PC i.e. 
192.168.0.XXX. If you choose to use a static IP address for the N1200 and it is not 

configured for your PC’s IP segment, the installation will encounter an error. 

Choosing Initialize new system will destroy all data contained on the hard disks. 

This data will not be recoverable.