Thecus All-Purpose Storage Server N1200BR Leaflet

 

 
 

14 

14. Change the default administrator password if desired. Click Apply. 

 

15. Finished! Access the N1200 Web Administrator Interface by pressing the 

Start Browser button. You can also configure another N1200 at this point 

by clicking Setup Other Device.   

 

 

1.  Insert the installation CD into your CD-ROM drive (the host computer must 

be connected to the network). 

 
2.  Browse your CD-ROM drive and navigate to the Setup Wizard > Mac 

folder. Double click on the .dmg file inside this folder. 

 

3.  A window will appear. Double click on the Thecus Setup Wizard icon. 

 

4.  The Setup Wizard will start and automatically detect all N1200s on your 

network. If none are found, please check your connection and refer to 

 for assistance. 

 

5.  Select the N1200 that you like to configure. Click Next. 

 

6.  Login with the administrator account and password. The default account 

and password are both “admin”.  

 

7.  If this is your first time setting up the N1200, select Initialize new 

system and click Next to continue. A prompt will appear confirming that 

hard disk data will be erased. Click OK to continue with the installation, or 
Cancel to go back. 

 

 
 

 
 

If you are instead configuring a previous installation, select Configure 
system. Click Next. 

 

8.  Name your N1200 and configure the network IP address. If your router is 

configured as a DHCP Server, configuring the N1200 to automatically 

obtain an IP address is recommended. You may also use a static IP 
address and enter the DNS Server address manually. Click Next. 

 

 

 
 

9.  Change the default administrator password if desired. Click Apply. 

 

10. Finished! Access the N1200 Web Administrator Interface by pressing the 

Start Browser button. You can also configure another N1200 at this point 
by clicking Setup Other Device.   

 

The N1200 is designed for installation on systems running Windows XP/2000 or Mac 
OSX or later. Users with older operating systems will need to install the N1200 on a 

host machine with a newer OS before using the N1200. 

Make sure that your N1200 is on the same IP segment as your computer i.e. 

192.168.0.XXX. If you choose to use a static IP address for the N1200 and it is not 

configured for your computer’s IP segment, the installation will encounter an error. 

Choosing Initialize new system will destroy all data contained on the hard disks. 

This data will not be recoverable.