Eaton CMMZ-00/08 106291 User Manual
Product codes
106291
EATON RF SYSTEM
2
EATON RF system
Wiring Examples for Switching Actuator CSAU-01/01
e.g. lamps, pumps,
fans and sound sig-
nal emitters
fans and sound sig-
nal emitters
e.g. heating,
garage door
opener
e.g. electric
sauna
voltage-free
multiphase
Switching fluorescent lamps with a CSAU-01/01 actuator
SA cycles
Total capacitor value
55000
25µF
26000
55µF
14000
90µF
8000
100µF
7000
130µF
The numbers of SA cycles specified are approximate values and may vary depending on the local conditions prevailing in each case. The
total capacitor value is the sum of the individual capacitor values according to the type and number of fluorescent lamps compensated in
parallel (see table below). The max. load current of the actuator must not be exceeded. The max. number of cycles selected depends on the
type of application and hence determines the number of fluorescent lamps to be switched via an actuator.
total capacitor value is the sum of the individual capacitor values according to the type and number of fluorescent lamps compensated in
parallel (see table below). The max. load current of the actuator must not be exceeded. The max. number of cycles selected depends on the
type of application and hence determines the number of fluorescent lamps to be switched via an actuator.
Lamp capacity
Capacitor / Compensation in parallel
4-13W
2uF
15-40W
4,5uF
58W
7uF
The above mentioned values are given by the manufacturers of fluorescent lamps and ballasts. Subject to changes without guarantee.