Sony CDX-DAB500U User Manual
28
CD playback
The disc cannot be loaded.
Another disc is already loaded.
The disc has been forcibly inserted upside
Another disc is already loaded.
The disc has been forcibly inserted upside
down or in the wrong way.
The disc does not play back.
Defective or dirty disc.
The CD-Rs/CD-RWs are not for audio use
Defective or dirty disc.
The CD-Rs/CD-RWs are not for audio use
MP3/WMA/AAC files cannot be played back.
The disc is incompatible with the MP3/WMA/
The disc is incompatible with the MP3/WMA/
AAC format and version. For details on
playable discs and formats, visit the support
site.
playable discs and formats, visit the support
site.
MP3/WMA/AAC files take longer to play back
than others.
The following discs take a longer time to start
than others.
The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree
– a disc recorded with a complicated tree
structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.
– a disc to which data can be added.
The display items do not scroll.
For discs with very many characters, those may
For discs with very many characters, those may
not scroll.
“AUTO SCR” is set to “OFF.”
– Set “A.SCRL-ON” (page 22).
– Press and hold
– Press and hold
(SCRL).
The sound skips.
Installation is not correct.
Installation is not correct.
– Install the unit at an angle of less than 45° in
a sturdy part of the car.
Defective or dirty disc.
USB playback
You cannot play back items via a USB hub.
This unit cannot recognize USB devices via a
This unit cannot recognize USB devices via a
USB hub.
Cannot play back items.
A USB device does not work.
A USB device does not work.
– Connect it again.
A USB device takes longer to play back.
The USB device contains files with a
The USB device contains files with a
complicated tree structure.
The sound is intermittent.
The sound may be intermittent at a high-bit-
The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Error displays/Messages
CHECKING
The unit is confirming the connection of a
The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
– Wait until confirming the connection is
finished.
ERROR
The disc is dirty or inserted upside down.
The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
The disc cannot play due to a problem.
– Insert another disc.
USB device was not automatically recognized.
– Connect it again.
Press to remove the disc.
FAILURE
The connection of speakers/amplifiers is
The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT
(Hubs Not Supported)
USB hub is not supported on this unit.
NO AF
(No Alternative Frequencies)
There is no alternative frequency for the
current station.
– Press
– Press
+/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(Program Identification) data (“PI SEEK”
appears).
for another frequency with the same PI
(Program Identification) data (“PI SEEK”
appears).
NO DATA
There is no program type for the current DAB
There is no program type for the current DAB
service.
– Press
– Press
(BACK).