C&E Funk-Wetterstation WB 92 schwarz Wireless Weather Station KW 9233-2w 8954c23 Data Sheet



If the time or date are misadjusted, the DCF reception is automatically deactivated
and another scan for the DCF signal is required.

If you only switch between 12h and 24h mode, switch mode, select the time zone or
display language for the weekday display, the DCF data are retained.

• Keep the button „MODE/SET“ (B2) pushed for about 3 seconds until a sound signal is issued

and „12“ or „24“ flashes at the lower right of the display.

• Use the button „+“ (B4) or „-“ (B5) to switch between 12h and 24 h mode. In 12h mode, „AM“

is displayed to the left of the time during the first half of the day, „PM“ during the second half
of the day.

• Briefly press the button „MODE/SET“ (B2), the time zone flashes in the lower right of the

display. Use the button „+“ (B4) or „-“ (B5) to set it in the area of +12.....-12 hours.



Keeping the respective button down for some time will adjust quickly. This is also
done when setting time and date.

If you do not push any button for about 15 seconds, the weather station saves all input
and leaves the setting mode automatically.

• Briefly push the button „MODE/SET“ (B2); the displayed hours flash. Set the hours with the

button „+“ (B4) or „-“ (B5).

• Briefly push the button „MODE/SET“ (B2); the displayed minutes flash. Set the hours with

the button „+“ (B4) or „-“ (B5).

• Briefly push the button „MODE/SET“ (B2); the displayed seconds flash. Briefly push the „+“

(B4) or „-“ (B5) buttons to reset them to „00“.

• Briefly push the button „MODE/SET“ (B2); the year flashes. Set it with the button „+“ (B4) or

„-“ (B5).

• Briefly push the button „MODE/SET“ (B2); the month flashes. Set it with the button „+“ (B4)

or „-“ (B5).

• Briefly push the button „MODE/SET“ (B2); the date flashes. Set it with the button „+“ (B4) or

„-“ (B5).