C&E Funk-Wetterstation WB 92 schwarz Wireless Weather Station KW 9233-2w 8954c23 Data Sheet



If you have any reception problems, reduce the distance between the outdoor
sensor and the weather station if required, or pick a different site of setup.

Also check the batteries in the outdoor sensor and insert new batteries if required.

If the outdoor sensor is not found, the display of the weather station shows only
dashes for the outdoor temperature and outdoor humidity.

Push the „SEARCH“ button (B9) on the reverse of the weather station for three seconds until
a sound signal is issued. Then the display for the outdoor temperature/humidity (A1/A3) and
the reception symbol (upper left of the display) flash.

The sensor search takes no more than 3 minutes; do not move the weather station during this
time and do not push any button. The sensor search is either terminated after these 3 minutes
or when the weather station finds the outdoor sensor.

• Briefly push the button „°C/°F“ (B5) at the weather station to switch the temperature unit

between °C (degrees Celsius) and °F (degrees Fahrenheit). The weather station must not
be in a setting mode for this.

• If the temperature unit in the display of the outdoor sensor is switched, open the battery

compartment (D4) of the outdoor sensor, then push the button „°C/°F“ (D7) there.

Briefly push the button „MODE/SET“ (B2) to switch between the following displays:

• Time with second (hour, minute, second)

• Time with weekday (hour, minute, weekday)

• Alarm time (hour, minute)