Futaba 10J F4109 Data Sheet

①  Call  the  menu  screen  from  the 

home screen by pressing the + key 

for 1 second.

＋

② Select 

    from the menu with the Jog 

key.

③  Open  the  setting  screen  by 

pressing the Jog key.

（1 second）

This screen displays and sets the various information from the receiver. An alarm and vibration can be 

generated depending on the information. For example, a drop in the voltage of the receiver battery housed 

in the aircraft can be reported by an alarm.

● This function can only be used in the T-FHSS Air mode. The S-FHSS system cannot use telemetry.
● Telemetry sensors sold separately can be mounted in the aircraft to display a variety of information. (Receiver voltage 

does not require a sensor.)

● The telemetry function cannot be used if the telemetry mode of the parameters is not ACT.
● When 2 receivers are used with 1 transmitter, the telemetry function cannot be used.

In the initial state, the receiver voltage is displayed at the transmitter.

● How to display receiver voltage 

on a home screen. 

"RX BATT" is chosen by ＋ key or － key.