Futaba 10J F4109 Data Sheet
Product codes
F4109
67
Common function
In the initial state, the receiver voltage maximum and minimum values are displayed in the
transmitter. (Value until reset)
Display
① Select "RX-BATT" from the telemetry
screen with the Jog key.
② Open the setting screen by
pressing the Jog key.
① Select "MIN/MAX" from the RX-BATT
screen with the Jog key.
② Date reset by pressing the
Jog key for 1 second.
● A confirmation "beep"
sounds when complete.
Calling the setting screen
MIN/MAX reset
● Viewing the receiver voltage maximum and minimum values.
RX-BATT
(ALARM) (VIB) (LIMIT)
DN▶INH ▶OFF ▶ 6.0V
SPEECH▶ INH SW▶ NULL
0.0V
MIN/MAX=
0.0V / 0.0V
Do not stare at or set the transmitter setting screen while flying.
■Losing sight of the aircraft during flight is very dangerous.
■When you want to check the information during flight, call the telemetry screen before flight and have the screen
■When you want to check the information during flight, call the telemetry screen before flight and have the screen
checked by someone other than the operator.
WARNING
Receiver voltage MAX
Receiver voltage display
Receiver voltage MIN
● Receiver → Transmitter.
The reception of the
signal from the receiver to
the transmitter is shown.
This does not affect flight.