Futaba 10J F4109 Data Sheet
Product codes
F4109
99
Airplane
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
+
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
(1 second)
Calling the setting screen
CH2 (CH4)
CH4 (CH2)
V-tail
This mixing is used with V tail aircraft that
combine the elevator and rudder functions.
"V-TAIL"
V-TAIL
V-Tail
(ACROBATIC)
NOTE:V Tail cannot be used simultaneously with
Elevon or Ailevator. When another function is already
activated, “Other WING mix “ON” ” is displayed on the
screen. Set the V tail function to ACT after setting the
active function to INH.
CH2 Servo
CH4 Servo
Elevator
ELE1
ELE2
Rudder
RUD2
RUD1
Activating the function
ELE1 rate
ELE2 rate
RUD2 rate
RUD1 rate
● When INH is selected, the
function cannot be used. To use
the function, select ACT.
(Rate adjustment)
● Select the setting item with
the Jog key.
■ Activating the function
① Select the "MIX" item and then
select the "ACT" by pressing
the + key or – key.
+
-
or
● W h e n y o u d o n o t u s e a
function, set to the "INH" side.
■ Rate adjustment
+
-
or
② Select the "RATE" item and then adjust
the mixing rate by pressing the + key or
– key.
Range:-100 ~ +100%
Default:+50%
(only ELE2 : -50%)
● When you want to return the set value to the initial value, press
the + key and – key simultaneously.However, polarity does not
return.
NOTE:We recommend that setting be performed while moving the stick and checking the amount of movement. If
the amount of movement is too large, elevator and rudder operation will be compounded and the servo travel range
will be exceeded and a dead band in which the servo will not operate may be created.
V-TAIL
V-TAIL