Alinco DJ-X-7 E hand-held scanner 1839 Data Sheet

Product codes

1839

Basic

perations

1. Press the

key to select a band to change its

tuning step.

Note that the bands with the * marks in the lists shown at the
previous page are not able to be selected.

2. Press the [F] key, and press the [MONI] key with the

icon ON.

3. Choose a tuning step by rotating the dial.

4. Press the [F] key to conclude the setting.

The DJ-X7 returns to the display of frequency.

●10MHz1MHz UP/DOWN
Frequency can be tuned in increments/decrements of

10MHz by pressing the

key once. Then, every time you

click the dial (rotate clockwise/counterclockwise), the
frequency can be changed in 10MHz units. The digit of the
10MHz flashes at this time.

Frequency can be tuned in increments/decrements

of 1MHz by pressing the

key once again. Then, every

time you click the dial (turn clockwise/counterclockwise), the
frequency can be changed in 1MHz units. The digit of the
1MHz flashes at this time.

Note that this key will be used as the Shift key when the
Shift function is set to ON (see on P.27). Thus, this
tuning becomes invalid.

■Preset mode

1. Press the

key to switch to the Preset mode.

2. Press the

key to select a band you wish to

monitor.

Every time you press the

key, the band is changed as

follows: AM radio

➔ FM radio ➔ TV ➔ AM radio...

3. Increase/decrease the frequency (or the channel for TV

reception) by rotating the dial.

"AM" appears on the LCD when you select AM radio,
and "WFM" appears when you select FM radio or TV.
Also, the frequency is displayed when AM/FM radio is
selected, but the channel number is displayed when
TV is selected.

Memo

BANK
BAND

PRI

V/P/M

NOTE

TONE

BANK

SHIFT

PRI

10M/1M

PWR

BAND

V/P/M

SCAN

Increase/decrease
by 10MHz units when pushing once.
by 1MHz units when pushing twice.

Tune frequency with a click

SHIFT

10M/1M

SHIFT

10M/1M

BANK
BAND