Alinco DJ-X-7 E hand-held scanner 1839 Data Sheet

19

Basic

O

perations

■Memory mode

For more information on a bank, see on P.20 (step 3). It is not
possible to select a bank which you have not programmed to.

For more information on a channel, see on P.20 (step 4). It is
not possible to select a channel which you have not
programmed to.

When nothing is programmed to memory channels, the
Memory mode is skipped and the receiver switches
between VFO and Preset in turn.

This mode allows you to program frequencies into the DJ-X7's
memory. A programmed frequency is called a channel.

■Memory types

The DJ-X7 has four types of memory bank; bank for normal
memory channels, bank for programmed scan channels, bank
for skip-search channels, and bank for priority channels. "Bank"
is like a partition which separates a group of channels from
others. The following explains each bank type.

Normal memory channel

....................................Channels which are usually called up in

the Memory mode. You can program
frequencies up to 1000 channels into the
available memory banks. Editing your
favorite frequencies in advance will ease
calling them up.

Programmed scan channel

.....................................Channels which are used for the

programmed scan. You can program up
to 50 pairs of frequency ranges (higher
and lower limits) into the "PS" bank.

Skip-search channel

.....................................Channels which are skipped while

executing the VFO scan or the
programmed scan. You can program
frequencies up to 100 channels into the
"PAS" bank.

Priority channel

....................................Channels which are used for the Priority

Monitoring function. You can program
frequencies up to 10 channels into the
"Pri" bank.

Memo